Read Sharp AR-C170 (serv.man48) User Guide / Operation Manual online
1-8
CHECKING THE SIZE OF A LOADED ORIGINAL
When a standard-size* original is placed, the original size is automatically detected
(automatic original detection function) and displayed in the top half of the
[ORIGINAL] key. Check the key to make sure that the original size has been
correctly detected.
(automatic original detection function) and displayed in the top half of the
[ORIGINAL] key. Check the key to make sure that the original size has been
correctly detected.
: [AUTO] appears when the automatic original detection function is operating.
: Displays the original size.
: Displays the original size.
If a non-standard size original is placed or if you wish to change the scanning
size, follow the steps below to manually set the original scanning size.
size, follow the steps below to manually set the original scanning size.
MANUALLY SETTING THE SCANNING SIZE
If you load an original that is not a standard size (such as a long original or an INCH size), or if the size is not detected
correctly, you must touch the [ORIGINAL] key and set the original size manually. Perform the following steps after
loading the document in the document feeder tray or on the document glass (see the previous page).
correctly, you must touch the [ORIGINAL] key and set the original size manually. Perform the following steps after
loading the document in the document feeder tray or on the document glass (see the previous page).
1
Touch the [ORIGINAL] key.
If the address directory
screen appears, touch the
[CONDITION SETTINGS]
key to display the
condition settings screen
(page 1-5).
screen appears, touch the
[CONDITION SETTINGS]
key to display the
condition settings screen
(page 1-5).
2
Touch the [MANUAL] key.
The sizes that can be
selected are displayed.
selected are displayed.
3
Touch the desired original size key.
[AUTO] is no longer
highlighted. [MANUAL] and
the original size key you
touched are highlighted.
To select B4 (8x1/2"x14"),
A3 (11"x17"), or "LONG
SIZE", touch the
highlighted. [MANUAL] and
the original size key you
touched are highlighted.
To select B4 (8x1/2"x14"),
A3 (11"x17"), or "LONG
SIZE", touch the
key and
then touch the appropriate
original size key.
original size key.
To select an inch size,
touch the [INCH] tab.
touch the [INCH] tab.
Touch the appropriate
inch original size key.
The selected key is
highlighted. To return to
the AB original size
palette, touch the [AB]
tab.
inch original size key.
The selected key is
highlighted. To return to
the AB original size
palette, touch the [AB]
tab.
4
Touch the outer [OK] key.
You will return to the
initial screen. (Touching
the inner [OK] key in the
step above returns you
to step 2.)
initial screen. (Touching
the inner [OK] key in the
step above returns you
to step 2.)
5
The selected size appears in the top half of
the [ORIGINAL] key.
the [ORIGINAL] key.
AUTO A4
ORIGINAL
STANDARD
RESOLUTION
1
2
NOTE
* Standard sizes that can be detected are as follows:
A5, B5, B5R, A4, A4R, B4, A3, 5-1/2"x8-1/2", 8-1/2"x11", 8-1/2"x11"R, 8-1/2"x14", 11"x17". If a non-standard
size original is loaded (including special sizes), the closest standard size may be displayed, or the original size
may not appear at all.
A5, B5, B5R, A4, A4R, B4, A3, 5-1/2"x8-1/2", 8-1/2"x11", 8-1/2"x11"R, 8-1/2"x14", 11"x17". If a non-standard
size original is loaded (including special sizes), the closest standard size may be displayed, or the original size
may not appear at all.
AUTO A4
ORIGINAL
STANDARD
RESOLUTION
MANUAL
ORIGINAL SIZE
O
2-SIDED
BOOKLET
IDED
OK
OK
ORIGINAL SIZE
SPEAKER
REDIAL
MANUAL
AUTO
A4R
B5R
A5
A5R
A4
B5
INCH
AB
OK
OK
ORIGINAL SIZE
SPEAKER
REDIAL
MANUAL
AUTO
A4R
B5R
A5
A5R
A4
B5
INCH
AB
SPEAKER
REDIAL
OK
OK
ORIGINAL SIZE
MANUAL
AUTO
INCH
AB
8 X11
1
/
2
5 X8 R
1
/
2
1
/
2
5 X8
1
/
2
1
/
2
8 X11R
1
/
2
8 X14
1
/
2
11X17
OK
OK
UAL
8 X11
1
/
2
11X17
ORIGINAL
STANDARD
RESOLUTION
8 X11
1
/
2
ApollonII_fax_ex.book 8 ページ ２００４年９月２０日 月曜日 午後３時２４分
Click on the first or last page to see other AR-C170 (serv.man48) service manuals if exist.