AR-285 (serv.man169). 006-1 E7-03 Troubles. 2 E7-11 Troubles (PREVIOUSLY SENT OUT AS FF COP 072) - Sharp Copying Equipment Technical Bulletin (repair manual)

Model
AR-285 (serv.man169)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
25.08 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / 006-1 E7-03 Troubles. 2 E7-11 Troubles (PREVIOUSLY SENT OUT AS FF COP 072)
File
ar-285-sm169.pdf
Date

View Sharp AR-285 (serv.man169) Technical Bulletin online

“FAST FACTS”
FOR THE ATTENTION OF THE SERVICE DEPARTMENT
Models :
AR-280
Ref : FF/COP/072
Date : 25/11/98
   
AR-285
AR-335
Subject :
1) E7-03 Troubles.
2) E7-11 Troubles.
1) E7-03 Troubles.
Symptom :-
This is caused by vibration of the HDD (Hard Disk Drive). A scanning failure
occurs and E7-03 may be displayed.
Action :-
The HDD Protective Sheet has been added to the rear of the Dark Box B cover
(P/G 5-4) to alleviate the vibration generated by the HDD (SEE BELOW FOR
FITTING INSTRUCTIONS).
Factory action has been taken from August 1998.
PART No.
DESCRIPTION
PRICE RANK
PSHEZ4685FCZZ
HDD PROTECTION SHEET
AG
Page 1 of 2
2) E7-11 Troubles.
Symptom :-
Due to the vibrations of the HDD, the Dark Box cover A (P/G 5-11) and
the Dark Box cover B (P/G 5-4) the CCD PWB harness FFC1/FFC2 (P/G
5-15 & 16) become poorly connected. This then causes an E7-11 fault
code.
Action :-
The CCD PWB harness has now been re-routed as shown below.
Factory action has been taken from the middle of July 1998.
Page 2 of 2
NOTE :-
Please advise our Technical Administration Department of any changes to your Service Department
details (i.e. fax number, telephone number, address, etc.) on fax number 0161 205 0014.
2) E7-11 Troubles.
Symptom :-
Due to the vibrations of the HDD, the Dark Box cover A (P/G 5-11) and
the Dark Box cover B (P/G 5-4) the CCD PWB harness FFC1/FFC2 (P/G
5-15 & 16) become poorly connected. This then causes an E7-11 fault
code.
Action :-
The CCD PWB harness has now been re-routed as shown below.
Factory action has been taken from the middle of July 1998.
Page 2 of 2
NOTE :-
Please advise our Technical Administration Department of any changes to your Service Department
details (i.e. fax number, telephone number, address, etc.) on fax number 0161 205 0014.
2) E7-11 Troubles.
Symptom :-
Due to the vibrations of the HDD, the Dark Box cover A (P/G 5-11) and
the Dark Box cover B (P/G 5-4) the CCD PWB harness FFC1/FFC2 (P/G
5-15 & 16) become poorly connected. This then causes an E7-11 fault
code.
Action :-
The CCD PWB harness has now been re-routed as shown below.
Factory action has been taken from the middle of July 1998.
Page 2 of 2
NOTE :-
Please advise our Technical Administration Department of any changes to your Service Department
details (i.e. fax number, telephone number, address, etc.) on fax number 0161 205 0014.
2) E7-11 Troubles.
Symptom :-
Due to the vibrations of the HDD, the Dark Box cover A (P/G 5-11) and
the Dark Box cover B (P/G 5-4) the CCD PWB harness FFC1/FFC2 (P/G
5-15 & 16) become poorly connected. This then causes an E7-11 fault
code.
Action :-
The CCD PWB harness has now been re-routed as shown below.
Factory action has been taken from the middle of July 1998.
Page 2 of 2
NOTE :-
Please advise our Technical Administration Department of any changes to your Service Department
details (i.e. fax number, telephone number, address, etc.) on fax number 0161 205 0014.
2) E7-11 Troubles.
Symptom :-
Due to the vibrations of the HDD, the Dark Box cover A (P/G 5-11) and
the Dark Box cover B (P/G 5-4) the CCD PWB harness FFC1/FFC2 (P/G
5-15 & 16) become poorly connected. This then causes an E7-11 fault
code.
Action :-
The CCD PWB harness has now been re-routed as shown below.
Factory action has been taken from the middle of July 1998.
Page 2 of 2
NOTE :-
Please advise our Technical Administration Department of any changes to your Service Department
details (i.e. fax number, telephone number, address, etc.) on fax number 0161 205 0014.
2) E7-11 Troubles.
Symptom :-
Due to the vibrations of the HDD, the Dark Box cover A (P/G 5-11) and
the Dark Box cover B (P/G 5-4) the CCD PWB harness FFC1/FFC2 (P/G
5-15 & 16) become poorly connected. This then causes an E7-11 fault
code.
Action :-
The CCD PWB harness has now been re-routed as shown below.
Factory action has been taken from the middle of July 1998.
Page 2 of 2
NOTE :-
Please advise our Technical Administration Department of any changes to your Service Department
details (i.e. fax number, telephone number, address, etc.) on fax number 0161 205 0014.
2) E7-11 Troubles.
Symptom :-
Due to the vibrations of the HDD, the Dark Box cover A (P/G 5-11) and
the Dark Box cover B (P/G 5-4) the CCD PWB harness FFC1/FFC2 (P/G
5-15 & 16) become poorly connected. This then causes an E7-11 fault
code.
Action :-
The CCD PWB harness has now been re-routed as shown below.
Factory action has been taken from the middle of July 1998.
Page 2 of 2
NOTE :-
Please advise our Technical Administration Department of any changes to your Service Department
details (i.e. fax number, telephone number, address, etc.) on fax number 0161 205 0014.
2) E7-11 Troubles.
Symptom :-
Due to the vibrations of the HDD, the Dark Box cover A (P/G 5-11) and
the Dark Box cover B (P/G 5-4) the CCD PWB harness FFC1/FFC2 (P/G
5-15 & 16) become poorly connected. This then causes an E7-11 fault
code.
Action :-
The CCD PWB harness has now been re-routed as shown below.
Factory action has been taken from the middle of July 1998.
Page 2 of 2
NOTE :-
Please advise our Technical Administration Department of any changes to your Service Department
details (i.e. fax number, telephone number, address, etc.) on fax number 0161 205 0014.
2) E7-11 Troubles.
Symptom :-
Due to the vibrations of the HDD, the Dark Box cover A (P/G 5-11) and
the Dark Box cover B (P/G 5-4) the CCD PWB harness FFC1/FFC2 (P/G
5-15 & 16) become poorly connected. This then causes an E7-11 fault
code.
Action :-
The CCD PWB harness has now been re-routed as shown below.
Factory action has been taken from the middle of July 1998.
Page 2 of 2
NOTE :-
Please advise our Technical Administration Department of any changes to your Service Department
details (i.e. fax number, telephone number, address, etc.) on fax number 0161 205 0014.

Download Sharp AR-285 (serv.man169) Technical Bulletin

Here you can view online and download Sharp AR-285 (serv.man169) Technical Bulletin in PDF. AR-285 (serv.man169) technical bulletin will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-285 (serv.man169) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.