Read Sharp AR-C170 (serv.man48) User Guide / Operation Manual online
1-7
1
LOADING A DOCUMENT
A document can be loaded in the reversing single pass feeder or on the document glass. Use the reversing single
pass feeder when faxing a large number of sheet originals. Use the document glass to fax originals that cannot be
scanned using the reversing single pass feeder such as thick or thin sheet originals or bound originals such as books.
pass feeder when faxing a large number of sheet originals. Use the document glass to fax originals that cannot be
scanned using the reversing single pass feeder such as thick or thin sheet originals or bound originals such as books.
USING THE REVERSING SINGLE PASS FEEDER
1
Lift the document glass cover and make
sure a document is not placed on the
document glass. Gently close the cover.
sure a document is not placed on the
document glass. Gently close the cover.
2
Adjust the document guides on the
document feeder tray to the width of the
document.
document feeder tray to the width of the
document.
3
Align the edges of the document pages
and then insert the stack in the document
feeder tray so that the first page is face up.
and then insert the stack in the document
feeder tray so that the first page is face up.
Insert the stack into the
document feeder tray until
it stops.
document feeder tray until
it stops.
USING THE DOCUMENT GLASS
1
Open the document glass cover, and place
the document face down on the document
glass. Gently close the cover.
the document face down on the document
glass. Gently close the cover.
Regardless of the size of the original, place the
original on the left side of the document glass. (Align
the original with the document glass scale and
centring
original on the left side of the document glass. (Align
the original with the document glass scale and
centring
mark.)
Place the original in the appropriate position for its
size as shown below.
size as shown below.
NOTE
Use the reversing single pass feeder for long
originals. The document glass cannot be used.
Use the reversing single pass feeder for long
originals. The document glass cannot be used.
NOTE
Do not place any objects under the original size
detector plate. Closing the document glass cover
with an object underneath may damage the original
size detector plate and prevent correct detection of
the document size.
Do not place any objects under the original size
detector plate. Closing the document glass cover
with an object underneath may damage the original
size detector plate and prevent correct detection of
the document size.
Original size detector
A5
R
A4
R
A4
A5
A3
B4
B5
B5
R
Document glass scale
mark
Document glass scale
mark
ApollonII_fax_ex.book 7 ページ ２００４年９月２０日 月曜日 午後３時２４分
Click on the first or last page to see other AR-C170 (serv.man48) service manuals if exist.