AR-C170 (serv.man48). AR-FX10 (Fax Option) Operation Manual when installed on AR-C170M or AR-C172M - Sharp Copying Equipment User Guide / Operation Manual. Page 10

After installing the unit and before using it as a fax machine, check the following points and program the required
information.

■

■

■

■ Make sure the fax power switch is turned on

In addition to the machine power switch (see page 1-4 of the "Operation manual (for general information and
copier operation)"), the machine also has a fax power switch (see "Fax power switch" on page 0-4). When
using the machine, be sure to keep the fax power switch turned on at all times.

■

■

■

■ Make sure the correct date and time have been set

Make sure the correct date and time have been programmed in the unit (refer to page 2-13 of "Operation manual
(for general information and copier operation)"). If the date and time are wrong, please correct them.
It is important to set the correct date and time because they are used for such features as Timer Transmission
(page 3-4).

■

■

■

■ Program the sender's name and sender's number

The name and fax number of the user of the machine is programmed in "Own number and name set" (page
8-5) in the key operator programs.
The programmed name and number are printed at the top of each transmitted fax page. The sender's number
is also used as an identification number when you use the Polling function to request transmission from another
fax machine (See "USING THE POLLING FUNCTION" on page 3-6).

You can connect a telephone to the machine and use it as an extension phone to place and receive calls like any normal
phone. When the other party has made the call, the extension phone can be used to activate fax reception. (remote
operation)

Make sure you hear a
"click" sound indicating
that the cord is securely
connected.

NOTES
You can check your programmed name and number by printing out the Sender List. (Refer to "PRINTING OUT
SETTINGS" page 8-12.)

●

If you connect a combination telephone/answering machine to the machine, you will not be able to use the
answering machine function.

●

You can place calls from the phone even during a power failure.

Extension
phone
socket

NOTE
In  New Zealand, not all standard telephones and
answering machines will respond to incoming
ringing when connected to the extension socket of
the equipment.

ApollonII_fax_ex.book  2 ページ  ２００４年９月２０日　月曜日　午後３時２４分