Read Sharp AR-C170 (serv.man26) Service Manual online
AR-C170M SIMULATION 9 - 60
(Items to be set)
• The smaller the set value is, the smaller the deflection quantity
of each specified item is. The greater the set value is, the
greater the deflection quantity is.
greater the deflection quantity is.
∗
Paper size judgment method (Item A to J)
In the cassette tray paper feed, the paper size smaller than
170mm is regarded as the small size.
In the desk tray or ADU paper feed, the paper size of 216mm or
smaller is regarded as the small size.
In the manual paper feed tray paper feed, the paper area of
49128mm² (184 x 267) or less is regarded as the small size.
In the cassette tray paper feed, the paper size smaller than
170mm is regarded as the small size.
In the desk tray or ADU paper feed, the paper size of 216mm or
smaller is regarded as the small size.
In the manual paper feed tray paper feed, the paper area of
49128mm² (184 x 267) or less is regarded as the small size.
∗
For the document size judgment of items P and Q in the
document feeder unit, 148mm (A5) or smaller is considered as
the small size.
document feeder unit, 148mm (A5) or smaller is considered as
the small size.
∗
Adjustment unit of items A to N: Time in the unit of 1ms (The
reference speed is 117mm/s. Variable according to the speed.)
reference speed is 117mm/s. Variable according to the speed.)
∗
Adjustment unit of items O to Q: Distance in the unit of 0.1mm
2. Enter the set value with the 10-key and press the [OK] key to
set the entered value.
3. Press the [EXECUTE] key.
∗
If there is no paper on the duplex tray, one sheet of the
selected paper is fed and transported to the duplex tray.
Then the entered value in procedure 3 is set and the
alignment plate moves according to the home position
corresponding to the entered value.
selected paper is fed and transported to the duplex tray.
Then the entered value in procedure 3 is set and the
alignment plate moves according to the home position
corresponding to the entered value.
∗
The paper sizes which can be used for transport and
alignment plate adjustment with SIM52-01 are LT, LTR, A4,
A4R, B5, B5R, 16K, and 16KR only. (For the other sizes,
"FEED ENABLE" occurs.)
alignment plate adjustment with SIM52-01 are LT, LTR, A4,
A4R, B5, B5R, 16K, and 16KR only. (For the other sizes,
"FEED ENABLE" occurs.)
(Set items)
• When the set value is changed by 1, it is changed by about
0.2mm. When the set value is increased, the alignment plate
paper width is narrowed. The adjustment value can be adjusted
in the increment of ±50 with 50 as the center value.
paper width is narrowed. The adjustment value can be adjusted
in the increment of ±50 with 50 as the center value.
Display
Content
Min. value
Max.
value
Default Display
A
TRAY (S)
Cassette tray deflection
adjustment value
adjustment value
1
99
15
B
LCC
LCC tray deflection
adjustment value
adjustment value
1
99
10
C
ADU (S)
ADU/deflection
adjustment value (small
size)
adjustment value (small
size)
1
99
30
D
MANUAL
PLAIN PAPER
(S)
PLAIN PAPER
(S)
Manual feed tray/
deflection adjustment
value (Normal paper,
small size)
deflection adjustment
value (Normal paper,
small size)
1
99
50
E
MANUAL
HEAVY
PAPER1
HEAVY
PAPER1
Manual feed tray/
deflection adjustment
value (Heavy paper 1)
deflection adjustment
value (Heavy paper 1)
1
99
50
F
MANUAL
HEAVY
PAPER2
HEAVY
PAPER2
Manual feed tray/
deflection adjustment
value (Heavy paper 2)
deflection adjustment
value (Heavy paper 2)
1
99
50
G
MANUAL
OHP1
OHP1
Manual feed tray/
deflection adjustment
value (OHP1)
deflection adjustment
value (OHP1)
1
99
50
H
MANUAL
OHP2
OHP2
Manual feed tray/
deflection adjustment
value (OHP2)
deflection adjustment
value (OHP2)
1
99
50
I
MANUAL ENV Manual feed tray/
deflection adjustment
value (Envelope)
value (Envelope)
1
99
50
J
DESK (S)
Desk tray/deflection
adjustment value (Small
size)
adjustment value (Small
size)
1
99
30
K
DESK (L)
Desk tray/deflection
adjustment value
(Normal paper, large
size)
adjustment value
(Normal paper, large
size)
1
99
30
L
MANUAL
PLAIN PAPER
(L)
PLAIN PAPER
(L)
Manual feed tray/
deflection adjustment
value (Normal paper,
large size)
deflection adjustment
value (Normal paper,
large size)
1
99
75
M
TRAY (L)
Cassette tray deflection
adjustment value (Large
size)
adjustment value (Large
size)
1
99
25
N
ADU(L)
ADU deflection
adjustment value (Large
size)
adjustment value (Large
size)
1
99
30
O
RSPF SIDE1
Document feeder unit
front surface document/
deflection quantity
adjustment value
front surface document/
deflection quantity
adjustment value
1
99
50
P
RSPF SIDE2
(L)
(L)
Document feeder unit
rear surface document/
deflection quantity
adjustment value (Large
size)
rear surface document/
deflection quantity
adjustment value (Large
size)
1
99
50
Q
RSPF SIDE2
(S)
(S)
Document feeder unit
rear surface document/
deflection quantity
adjustment value (Small
size)
rear surface document/
deflection quantity
adjustment value (Small
size)
1
99
50
52
52
-01
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the duplex print mode stacking
capacity (Used to adjust the stop position of the
duplex unit paper tray width alignment plate. The
home position of the width alignment plate is
changed by software.)
capacity (Used to adjust the stop position of the
duplex unit paper tray width alignment plate. The
home position of the width alignment plate is
changed by software.)
Section
Duplex
Item
Operation
Operation/
Procedure
Procedure
1. Select the adjustment mode with the scroll key.
∗
When the machine is not ready for paper feed,
"NOT READY" is displayed. When the
corresponding tray is unable to feed, "FEED
UNABLE" is displayed. If it is able to feed,
"FEED ABLE" is displayed.
"NOT READY" is displayed. When the
corresponding tray is unable to feed, "FEED
UNABLE" is displayed. If it is able to feed,
"FEED ABLE" is displayed.
Item
Set
range
Default
A
Intermediate tray alignment plate
adjustment value (Manual feed)
adjustment value (Manual feed)
0 – 99
50
B
Intermediate tray alignment plate
adjustment value (Cassette 1)
adjustment value (Cassette 1)
0 – 99
50
C
Intermediate tray alignment plate
adjustment value (Cassette 3)
adjustment value (Cassette 3)
0 – 99
50
D
Intermediate tray alignment plate
adjustment value (Cassette 4)
adjustment value (Cassette 4)
0 – 99
50
E
Intermediate tray alignment plate
adjustment value (LCC)
adjustment value (LCC)
0 – 99
50
Click on the first or last page to see other AR-C170 (serv.man26) service manuals if exist.