Read Sharp AR-C170 (serv.man26) Service Manual online
AR-C170M SIMULATION 9 - 31
3. Used to set the paper kind display mode in the manual paper
feed mode.
∗
Documents or paper of 8.5" x 13" are treated as a selectable
size.
size.
(Selection item)
[Copy vendor mode]
1. Select the kind of the counter with the scroll key.
2. Enter "1" or "2" with the 10-key pad and press the [OK] key.
26
26
-2
Purpose
Setting
Function
(Purpose)
(Purpose)
1. Used to set the paper size of the large capacity
tray. (When the paper size is changed, the
software setup must be changed accordingly
with this simulation.)
software setup must be changed accordingly
with this simulation.)
2. Used to detect 8.5 " x 13" (INCH Series) paper or
documents and to set the display mode. (All
paper feed modes)
paper feed modes)
3. Used to set the display form of the paper kind in
the manual paper feed mode.
Section
Paper feed
Item
Specifications
Operation/
Procedure
Procedure
1. Used to set the paper size of the large capacity
tray.
2. Used to set to allow 8.5" x 13" size paper to be
treated as a selectable size.
Item
Set value
Content
Paper size
setting
setting
LCC
1
8.5 x 11
2
A4
LEGAL
0
8.5 x 14
1
8.5 x 13
MFT TYPE
0
Displayed in gram.
1
Displayed in pound.
26
-3
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set the auditor specification mode. Setting
must be made according to the use conditions of the
auditor.
must be made according to the use conditions of the
auditor.
Section
Auditor
Item
Specifications
Operation/
Procedure
Procedure
Enter the code number corresponding to the auditor
specification mode.
specification mode.
Mode
Content
[P10]
Built-in auditor mode
[AR-EC1]
Card counter mode (only Japan)
[MODE1]
Coin vendor mode 1
[MODE2]
Coin vendor mode 2
[MODE3]
Coin vendor mode 3
Diag
setting
Specified
number
completed
with money
left
Lack of money during a
copy job
Specified
number
completed
with no
money left
BW/Color
(with no
money left)
Color (with
money left)
Case 1
Case 2
Case 3
Case 4
26-3=3
MODE1
Operation 1 Operation 2 Operation 2
Operation 1
26-3=4
MODE2
Operation 1 Operation 1 Operation 2
Operation 1
26-3=5
MODE3
Operation 1 Operation 3 Operation 2
Operation 3
Operation 1: The set status remains until the auto clear set
time has passed. (Default: 60sec Changeable
with key operations.)
with key operations.)
Operation 2: Auto clear is not made.
Operation 3: Setting is immediately cleared, and the display
Operation 3: Setting is immediately cleared, and the display
returns to the standby menu.
Case 1/Case 2 (with money left): B/W copy is allowed. If, however,
charge money fro color copy is exhausted during a color copy job,
when sufficient money for the job is supplied, only the color start
key of the READY lamp lights up.
charge money fro color copy is exhausted during a color copy job,
when sufficient money for the job is supplied, only the color start
key of the READY lamp lights up.
26
-5
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set the count mode of the total counter and
the maintenance counter.
the maintenance counter.
Item
Specifications
Counter
Operation/
Procedure
Procedure
Used to set the single count-up or double count-up
for the total counter, the maintenance counter, and
the developer counter when printing is performed
with A3, 11 x 17" paper.
for the total counter, the maintenance counter, and
the developer counter when printing is performed
with A3, 11 x 17" paper.
Item
Content
Set range
Default
A
TOTAL(B/W)
Total counter (B/W)
1 – 2
2
B
TOTAL(COL)
Total counter (Color)
1 – 2
2
C
MAINTE(B/W)
Maintenance (B/W)
1 – 2
2
D
MAINTE(COL)
Maintenance (Color)
1 – 2
2
Click on the first or last page to see other AR-C170 (serv.man26) service manuals if exist.