AR-BD14 (serv.man5). ARBD14-Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 41

The Copier/Printer front panel has 2 modes of operation Copier mode
and printer mode.

In copier mode limited information about the status of the printer
function is available.

The control panel can be switched to printer configuration mode by a
key operation.

Generally the printer control panel is a multi-line 1/4 VGA character
oriented display with numeric entry and list selection.

In addition to configuring printing parameters the printer control panel
can:

1. Set the NIC card IP address

2. Print a demonstration print/capabilities page

3. Restore the printing system to default configuration (except serial

# and NIC)

4. Reset the printing system to power on configuration

The configuration menu can be displayed on the front panel by the
following procedure.

1. Press the COPY/PRINT select key. Make sure the Print indicator

lights.

2. Press the ONLINE key to take the AR-5132 printer off line.

3. Press the AUDIT CLEAR key and observe that the printer option

configuration menu appears on the display.

1.NO

2.YES

MET HOD
1 .

∗

SWITC H  AT END OF JOB

2.SWITCH  AFTER IO TIMEOUT

3.DISABLE PA RALLEL PORT

4.DISABLE N ETWORK PORT

SWITCHING
1.

∗

AUTCMATIC

2.PJL

3.USE DEFAULT EMULATION 

   ONLY

EMULATION
4.

∗

PCL

5.POSTSCRIPT

SWITCHING
1.

∗

AUTCMATIC

2.PJL

3.USE DEFAULT EMULATION 

   ONLY

EMULATION
4.

∗

PCL

5.POSTSCRIPT

PRINT POSTSCRIPT ERRORS
1.

∗

NO

2.YES

1.NO

2.YES

1.NO
2.

∗

OFF

ORIENTATION
1.

∗

PORTRAIT

2.LANDSCAPE

1.MULTI-BIN SORTER
2.

∗

TOP TRAY

SETTING
1.

∗

SIMPLEX

2.DUPLEX

1.TRAY1

2.TRAY2
3.

∗

TRAY3

4.MANUAL FEED TRAY

1.STA TU S/C ON FIG P AGE

2.NE TWOR K IN  TE RFAC E

   CONFIG P AGE

3.PC LSE  FONT/D EMO

   PAGE

4.P OSTS C R IP T  F ON T/D EMO

   PAGE

5.NV RAM C ON FIG PA GE

1.DUPLEX PRINTING

2.DEFA ULT PA PER INPUT

   TRAY

3. MULTI-COPY  OUTPU T 

   BIN

4.PA GE ORIENTATION

5.NUMBER OF  COPES

6.NPUT TRAY CHAINING

7. RESET TO FACTC RU

    DEFAUL TS

1.PRINT POSTSCRIPT 

   ERRORS

1.CONFIG/D EMO PA GE 

   MENU

2.PRINTING  CONFIG MENU

3.POSTS CRIPT  CON FIG

   MENU

4.IO CON FIG MENU

5.NETWORK C ONFI G ME NU

NOTE : The menues inside the gray area is for AR-5132 with network card option installed.

1.IO TIMECUT

2.PARALLEL PORT 

   EMULATION SWITCHING

3.NETWORK PORT

   EMULATION SWITCHING

4.PORT SWITCHING 

   METHOD

1.ENTER IP ADDRESS

2.ENTER IP NETMASK

3.ENTER IP GATEWAY

4.RESET NETWORK

   ADAPTER

Print mode

Output From

Check item

Note

Self Prints

SIM 64-1

Check printing operation in the AR-5132.

Performed by the serviceman only. 

Demo Prints

Front Panel

Check the setting of printer functions.
Check the contents of ROM and RAM on the printer PWB.
Check printing operation of the printer. 
Check connection of interface.

Installation of the AR-BD14 is required.

Test Prints

Printer Driver

Check printing operation of the printer. 
Check installation of the printer driver.
Check that the printer driver normally functions.
Check connection with the computer. 

Installation of the AR-BD14 is required.
Installation of the printer driver is required.

Application
software

Check printing operation of the printer.
Check for any troubles in the application software.
Check that the printer driver normally functions. 
Check connection with the computer. 

Installation of the AR-BD14 is required.
Installation of the printer driver is required.
Installation of the application software is
required. 

– 39 –