AR-BD14 (serv.man5). ARBD14-Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 20

Installation of the AR-BD14 to the AR-5132 allows the following key
operator programs additionally. 

PROGRAM NAME

FUNCTION

P203

Setting Time for
Returning to Copy
Mode

Sets a time interval after which
the copier returns to the copy
mode after completion of printer
settings

P215

Exposure Adjust for
Printing

Lightens or darkens printouts

P216

Output Method of
Printing to Staple
Sorter When Paper
Remains

Sets the manner in which
printouts are output when an
optional staple sorter (SF-S53N)
is used and paper remains in the
sort bins

P272

Disabling of Interrupt
during Printing

Determines whether interrupt
copying is to be allowed during
printing.

P273

Manual Feed Tray
Selection Control in
Printing

Determines whether the manual
feed tray is to be included in the
trays for auto paper selection
and auto tray switching

Detail of key operator program list (Printer)

P

number

Message-related

information

Message

Key input1

Key input2

Action

Remarks

P203

P203: SETTING TIME FOR RETURNING TO COPY MODE

SET THE TIME FOR RETURNING TO THE COPY MODE
FROM THE PRINTER MODE AFTER PRINTER SETTINGS
HAVE BEEN COMPLETED. PRESS THE START KEY AFTER
ENTRY. (10 TO 240 SECONDS)

TIME FOR RETURNING TO COPY MODE:

Enter returning
time for copy
mode 10 ~ 240

[START]

Time for
Returning to copy
mode is set

Default is "60
seconds"

P215

P215: EXPOSURE ADJUST FOR PRINTING
1. LIGHTEST
2. LIGHTER
3. NORMAL
4. DARKER
5. DARKEST

1, 2, 3, 4, 5

Default is "Normal"

P216

P216: OUTPUT METHOD OF PRINTING TO STAPLE
SORTER WHEN PAPER REMAINS
1. OUTPUT AS SPECIFIED EXCEPT STAPLING
2. OUTPUT ONLY TO TOP BIN
3. OFFLINE (NO OUTPUT)

1, 2, 3

Default is "Output
as specified exept
stapling"

P272

P272: DISABLING OF INTERRUPT DURING PRINTING
1. YES
2. NO

1, 2

Default is "No"

P273

P273: MANUAL FEED TRAY SELECTION CONTROL IN
PRINTING.
PROHIBIT MANUAL FEED TRAY IN AUTO PAPER
SELECTION AND AUTO TRAY SWITCHING IN PRINT
MODE?
1. YES
2. NO

1, 2

Default is "Yes"

Installation of the AR-BD14 to the AR-5132 allows the following simulations additionally. 

Main code

Sub code

Content

Remarks

Write in memory

Adjustment range

S-67

Printer checks.

S-67

01

DRAM check.

Printer PWB is needed.

S-67

02

Centronics port check.

Printer PWB is needed.
Special tool is needed.

S-67

03

Adjusts Centronics port timing.

Printer PWB is needed.

S-67

09

Flash test.

Printer PWB is needed.

S-67

11

Sets select In signal.

Printer PWB is needed.

0/1

S-67

12

Flash program writing

Printer PWB is needed.

S-67

13

Flash program data comparison check

Printer PWB is needed.

S-67

14

Flash program data write/comparison check

Printer PWB is needed.

S-67

15

Flash program data sum check

Printer PWB is needed.

– 18 –