Read Sharp AR-AX10 (serv.man2) User Guide / Operation Manual online
AXIS 7000
User’s Manual
Section 2: Physical Description
11
Power Supply
The AXIS 7000 can use either the AXIS PS-C or AXIS PS-E power
supply.
supply.
The Front Panel
The front panel indicators show the status of the AXIS 7000. The
function of each indicator is described below.
function of each indicator is described below.
Status Indicator
The Status indicator flashes during startup and remains lit when the
AXIS 7000 is ready for use. If the status indicator turns off, this may
indicate an error.
AXIS 7000 is ready for use. If the status indicator turns off, this may
indicate an error.
Busy Indicator
The Busy indicator turns on when the AXIS 7000 is allocated for use
and remains on during the scanning process.
and remains on during the scanning process.
Network Indicator
The tri-colored Network indicator flashes:
yellow - indicating network activity on a 10MB Ethernet network.
green - indicating network activity on a 100MB Fast Ethernet
network.
red - indicating that the unit is not correctly connected to the
network.
yellow - indicating network activity on a 10MB Ethernet network.
green - indicating network activity on a 100MB Fast Ethernet
network.
red - indicating that the unit is not correctly connected to the
network.
Power Indicator
The Power indicator is normally on while power is applied. If the
indicator remains off or flashes, this indicates a problem with the
AXIS 7000 or its power supply.
indicator remains off or flashes, this indicates a problem with the
AXIS 7000 or its power supply.
Status
Indicator
Indicator
Network
Indicator
Indicator
Power
Indicator
Indicator
Busy
Indicator
Indicator
Click on the first or last page to see other AR-AX10 (serv.man2) service manuals if exist.