Read Sharp AR-AX10 (serv.man2) User Guide / Operation Manual online
AXIS 7000
User’s Manual
Appendix A: Troubleshooting
127
FTP
Follow these steps to restore the default settings using FTP:
1. Log in to the AXIS 7000 with the command
ftp <Internet
address>
,
where
<Internet address>
is the name or IP address
assigned to your AXIS 7000.
2. You will be prompted for user id and password. Use the user id
root
,
which has the default password
pass
.
3. Issue the command
get defaults
to restore the default settings.
The unit now restarts automatically.
4. Log out using the command
quit
,
bye
or
exit
depending on your
FTP version.
The AXIS 7000 will now restart with the factory default settings.
Front Panel Indicator Conditions
The Power LED is hardware controlled and should always remain on
when power is connected to the AXIS 7000. The remaining LEDs are
all software controlled.
when power is connected to the AXIS 7000. The remaining LEDs are
all software controlled.
Normal Conditions
This table shows the front panel indicators during normal conditions:
Event
Status
LED
Busy
LED
Network
LED
Remarks
Power up
On
On
On
Initial power to unit
On
Off
Off
Memory test
Flash
On
Off
Self test in progress
On
Off
Flash
Network LED flashes when network
traffic is present
traffic is present
Sending
On
On
Flash
Idle
On
Off
Flash
Network LED flashes when network
traffic is present
traffic is present
Flash loading
Blink
Blink
Blink
During Flash loading, the Network
LED blinks quickly
LED blinks quickly
