AR-5316E (serv.man3). AR-5316 Service Manual (Supplemental information for AR-5316E and AR-5320E). - Sharp Copying Equipment Service Manual (repair manual). Page 12

AR-5316/5320 USER PROGRAMS 8-1

The user programs allow the parameters of certain functions to be set, changed, or canceled as desired.

This copier has the following user programs. 

*1 On models with a SPF.

*2 On model with the two trays.

Program name

Program 

No

Description

Default

Parameters

Auto clear time

1

"Auto clear time" automatically returns the copy settings to the initial 
settings when a certain period of time elapses after a copy is made. 
This program is used to select the period of time. "Auto clear time" 
can also be disabled.

60sec

1 (OFF)

2 (10sec)

3 (20sec)

4 (60sec)

5 (90sec)

6 (120sec)

Preheat mode

2

This function automatically switches the machine to a low power 
consumption state if the set duration of time elapses without the 
machine being used when the power is on.
The POWER SAVE indicator lights up, however, the keys on the 
operation panel can be used. Normal operation automatically 
resumes when a key on the operation panel is pressed, a print job is 
received or an original is placed. 

1min

1 (1min)

2 (5min)

3 (30min)

4 (60min)

5 (120min)

6 (240min)

Auto power shut-off timer

3

This function automatically switches the machine to a state that 
consumes even less power than preheat mode if the set duration of 
time elapses without the machine being used when the power is on. 
All lights except the POWER SAVE indicator and ON LINE indicator 
go off. To resume normal operation, press the [START] key. Normal 
operation also resumes automatically when a print job is received or 
scanning is begun from a computer. While in auto power shut-off 
mode, no keys (except the [START] key) can be used.

5min

1 (5min)

2 (30min)

3 (60min)

4 (120min)

5 (240min)

Stream feeding mode *

1

4

When copying using the SPF, during the period of time that the SPF 
indicator blinks after an original has been scanned (about 5 
seconds), a subsequent original can be placed and automatically 
fed into the machine.

OFF

0 (OFF)

1 (ON)

Auto power shut-off 
setting

5

Use this setting to enable or disable auto power shut-off.

ON

0 (OFF)

1 (ON)

Auto paper select mode *

2

8

This function automatically selects paper that is the same size as 
the original placed in the SPF, or the same size as that selected with 
the [ORIGINAL SIZE ENTER] key. The function can be disabled.

ON

0 (OFF)

1 (ON)

Auto tray switching *

2

9

If the paper runs out during printing and there is paper of the same 
size and orientation in another tray, this function automatically 
switches to that tray (excluding the bypass tray). The function can be 
disabled.

ON

0 (OFF)

1 (ON)

Auditing mode

10

Use to enable or disable "Auditing mode".
"Auditing mode" is initially disabled.

OFF

0 (OFF)

1 (ON)

Account number entry

11

Use to set up account numbers. 
Up to 20 accounts can be established.

-

-

Account number change

12

Use to change an account number.

-

-

Account number deletion

13

Use to delete an account number.
A single account number can be deleted, or all account numbers at 
once.

Delete 

single 

account

0 (Delete single account)

1 (Delete all accounts)

Number of copies per 
account

14

This displays the number of copies made by each account.
The maximum count is 49,999. If this number is exceeded, the count 
will start over from 0.

-

-

Resetting account

15

Use to reset the copy count of an account to 0.
The copy count of a single account or of all accounts can be reset.

Reset single 

account

0 (Reset single account)

1 (Reset all accounts)

Resolution in Auto/Text 
mode

23

This setting is used to change the copy resolution in AUTO and 
TEXT mode from 600 x 300 dpi to 600 x 600 dpi 
(high-quality mode).
Scanning is slower when high-quality mode is used.

300dpi

1 (300dpi)

2 (600dpi)

[08]USERPROGRAMS.fm  1 ページ  ２００３年１２月１９日　金曜日　午後３時２７分