Read Sharp AR-5316E (serv.man3) Service Manual online
AR-5316/5320 SIMULATIONS 7-1
[7] SIMULATIONS
1. Entering the simulation mode
Perform the following procedure to enter the simulation mode.
"#" key
"#" key
Interrupt key
"C" key
Interrupt key
Main code
Start key
Sub code
Start key
2. Canceling the simulation mode
When the clear all key is pressed, the simulation mode is cancelled.
When the interruption key is pressed, the process is interrupted and the
screen returns to the sub code entering display.
screen returns to the sub code entering display.
*
After canceling the simulation mode, be sure to turn OFF/ON the
power and check the operation.
Note: If the machine is terminated by a jam error or paper empty during
copying in the adjustment by the simulation, recopying is required.
3. List of simulations
Main
code
code
Sub
code
Contents
01
01
Mirror scanning operation
02
Mirror home position sensor (MHPS) status display
06
Mirror scanning operation aging
02
01
Single paper feeder (SPF) aging
02
SPF sensor status display
03
SPF motor operation check
08
SPG paper feed solenoid operation check
11
SPF PS release solenoid operation check
05
01
Operation panel display check
02
Fusing lamp and cooling fan operation check
03
Copy lamp lighting check
06
01
Paper feed solenoid operation check
02
Resist roller solenoid operation check
10
Cassette semi-circular roller cleaning
07
01
Warm-up display and aging with jam
06
Intermittent aging
08
Shifting with warm-up display
08
01
Developing bias output
02
Main charger output (Grid = HIGH)
03
Main charger output (Grid = LOW)
06
Transfer charger output
10
-
Toner motor operation
14
-
Trouble cancel (except for U2)
16
-
U2 trouble cancel
20
01
Maintenance counter clear
21
01
Maintenance cycle setting
02
Mini maintenance cycle setting
22
01
Maintenance counter display
02
Maintenance preset display
03
Jam memory display
04
Jam total counter display
05
Total counter display
06
Developing counter display
07
Mini maintenance preset display
08
SPF counter display
09
Paper feed counter display
12
Drum counter display
13
CRUM type display
14
P-ROM version display
22
15
Trouble memory display
17
Copy counter display
18
Printer counter display
21
Scanner counter display
22
SPF jam counter display
24
01
Jam total counter clear
02
Trouble memory clear
04
SPF counter clear
06
Paper feed counter clear
07
Drum counter clear
08
Copy counter clear
09
Printer counter clear
13
Scanner counter clear
14
SPF jam total counter clear
25
01
Main motor operation check
10
Polygon motor operation check
26
02
Size setting
03
Auditor setting
05
Count mode setting
06
Destination setting
07
Machine condition check (CPM)
18
Toner save mode setting
30
CE mark conformity control ON/OFF
31
Auditor mode exclusive setup
36
Cancel of stop at maintenance life over
37
Cancel of stop at developer life over
38
Cancel of stop at drum life over
39
Memory capacity check
42
Transfer ON/OFF timing control setting
43
Side void amount setting
51
Copy temporary stop function setting
30
01
Paper sensor status display
42
01
Developing counter clear
43
01
Fusing temperature setting
12
Standby mode fusing fan rotation setting
13
Fusing paper interval control allow/inhibit setting
44
34
Transfer current setting
40
Setting of rotation time before toner supply
46
01
Copy density adjustment (300dpi)
02
Copy density adjustment (600dpi)
09
Copy exposure level adjustment, individual setting
(Text) 300dpi
(Text) 300dpi
10
Copy exposure level adjustment, individual setting
(Text) 600dpi
(Text) 600dpi
11
Copy exposure level adjustment, individual setting
(Photo) 600dpi
(Photo) 600dpi
18
Image contrast adjustment (300dpi)
19
Exposure mode setting
(Gamma table setting/AE operation mode setting/
Photo image process setting)
(Gamma table setting/AE operation mode setting/
Photo image process setting)
20
SPF exposure correction
29
Image contrast adjustment (600dpi)
30
AE limit setting
31
Image sharpness adjustment
48
01
Main scanning magnification ratio adjustment
05
SPF/RSPF mode sub scanning magnification ratio
adjustment in copying
adjustment in copying
49
01
Flash ROM program writing mode
12
Standby mode fusing fan RPM setting
Main
code
code
Sub
code
Contents
[07]SIMULATIONS.fm 1 ページ ２００３年１２月１９日 金曜日 午後３時２６分
Click on the first or last page to see other AR-5316E (serv.man3) service manuals if exist.