Read Sharp AR-5132 (serv.man66) Technical Bulletin online
Page( 3 / 6 )
7. Attach De-curler Sheet (No. 18) × 5 and Reverse PG Auxiliary Sheet (No.17) × 1 to
De-curler Guide (No. 16).
Please see the diagram below for the reference points for attaching De-curler Guide Sheet
and Reverse PG Sheet. De-curler Guide Sheet must be attached along with Reference Line
A and B. Reverse Inside PG Auxiliary Sheet must be attached along with Reference Line D
and E.
The amounts of these parts going off Reference Line must be within 0.5Mm on the +
side. Any amount of these parts must not go off Reference Line on the side.
The amounts of these parts going off Reference Line must be within 0.5Mm on the +
side. Any amount of these parts must not go off Reference Line on the side.
8. Fit De-curler Guide that has been completed in Step 7 above to Fuser Lower Frame
with Screw (No. 15) × 4. After the completion of this procedure, be sure to re-check
De-curler Belt to make it certain that they are located properly.
De-curler Belt to make it certain that they are located properly.
9.Remove Fuser Separation Pawls and Separation Springs from the existing Lower Pawl
Fitting Plate, and attach them to new Lower Pawl Fitting Plate (No. 2).
M3×6
Screw
Lower pawl
Fuser lower separation pawl
Lower pawl fitting plate
+
+
+
+
+
Reference Ling B
+
+
+
De-curler Guide Sheet
Reverse PG Auxiliary Sheet
Reference Ling B
Reference Ling B
Reference Ling B
Reference Ling B
Reference Ling E
Reference Ling D
Reference Ling A
Click on the first or last page to see other AR-5132 (serv.man66) service manuals if exist.