Read Sharp AR-5132 (serv.man66) Technical Bulletin online
4. Put De-curler Belt (No.7) ×6 through the part that has been assembled in Step 2 above, and
insert it into Fuser Lower Frame. At this point, make sure that De-curler Belts are located
as shown below.
as shown below.
Use the existing shaft bearings and E-rings.
5. Insert Belt Shaft (No. 8) with De-curler Belts fitted into Du-curler Frame.
Then secure it by FU Drive Shaft Bearing (No.9) x 2 and E-ring (No. 10)×2.
6.Fit Shaft Bearing (No. 12) × 2 and Belt Tension Shaft (No. 11) to De-curler Frame,
and secure them by 4E-ring (No. 13) × 2.
De-curler Belt
De-curler Belt must be
fitted into the slot.
Belt Drive Shaft
E-ring
E-ring FU Drive Shaft Bearing
FU Drive Shaft Bearing
E-ring
E-ring
Bearing
Bearing
Belt Tension Shaft
Click on the first or last page to see other AR-5132 (serv.man66) service manuals if exist.