Read Sharp AR-505 (serv.man9) Service Manual online
T3DN
Tray 3 lower limit sensor
LSTS
Stapler sensor
NCTS
Staple cartridge sensor
PWD
Power off detection
DSW1
Copier connection detection
DSW2
Top door open/close detection
DSW3
Front door open/close detection
3 - 3
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to check the operation of the loads in the sorter
and the control circuit.
and the control circuit.
Section
Sorter/Finisher
Item
Operation
Operation/
Procedure
Procedure
The display differs depending on the unit (sorter, fin-
isher) which is installed.
isher) which is installed.
1. The names of the loads which can be operated are displayed.
The selected load is highlighted.
2. Press the [EXECUTE] key, and the selected load is operated.
During the operation of the load, the [EXECUTE] key is high-
lighted. If the [EXECUTE] key is pressed when it is highlighted,
the operation is interrupted.
lighted. If the [EXECUTE] key is pressed when it is highlighted,
the operation is interrupted.
In the case of AR-SS1
DTM
Transport motor
DCM
Holder motor
BZ
Buzzer
TMM
Bin shift motor
DSM
Alignment motor
SAM
Stapler drive motor
In the case of AR-FN1
PSM
Pusher motor
JGM
Jogger motor
STUM
Staple unit shift motor
FML
Main drive motor low transport speed
FMH
Main drive motor high transport speed
RVM
Reverse motor
EVM
Elevator motor
OFM
Offset motor
INGSL
Paper entry gate solenoid
T3UPSL
Tray 3 upper limit solenoid
OG1SL
Paper exit gate 1 solenoid
OG2SL
Paper exit gate 2 solenoid
OG3SL
Paper exit gate 3 solenoid
RRSL
Reverse roller pressure release solenoid
SPSL
Short path select solenoid
STSL
ST paper holding solenoid
T12CL
Tray 1 and tray 2 speed reduction clutch
PDCL
Paddler clutch
STOPCL
ST paper exit roller pressure clutch
T3SLCL
Tray 3 speed reduction clutch
STM
Staple motor
T3ORSL
Tray 3 normal speed clutch
In the case of AR-FN2/FN3
PSM
Pusher motor
JGM
Jogger motor
STUM
Staple unit shift motor
FM
Main drive motor
T3OM
Tray 3 paper exit drive motor
EVM
Elevator motor
OFM
Offset motor
T3PDSL
Tray 3 paper exit paddler solenoid
STPDSL
ST paddler solenoid
OG1SL
Paper exit gate 1 solenoid
OG2SL
Paper exit gate 2 solenoid
OG3SL
Paper exit gate 3 solenoid
STSL
ST paper holding solenoid
T12CL
Tray 1 and tray 2 speed reduction clutch
PDCL
Paddler clutch
STOPCL
ST paper exit roller pressure clutch
STM
Staple motor
PPSL
Paper holding solenoid
AR-505
7 – 9
8/6/1999
Click on the first or last page to see other AR-505 (serv.man9) service manuals if exist.