Read Sharp AR-505 (serv.man9) Service Manual online
3 - 6
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the finisher stacking capability. (Used to
adjust the stop position of the finisher paper width di-
rection alignment plate (jogger). This adjustment is
made by changing the width direction alignment plate
home position by the software.)
adjust the stop position of the finisher paper width di-
rection alignment plate (jogger). This adjustment is
made by changing the width direction alignment plate
home position by the software.)
Section
Sorter/Finisher
Item
Operation
Operation/
Procedure
Procedure
1. Select B mode with [
] and [
¯
] keys.
2. Select the paper size by entering the numbers
(0 or 1) with the 10-key pad.
3. Select A mode with [
] and [
¯
] keys.
4. Enter the adjustment value with the 10-key pad.
5. Press the [EXECUTE] key.
The value entered in procedure 4 is set.
The finisher’s jogger starts operation. During operation, the
[EXECUTE] key is highlighted.
If the [EXECUTE] key is pressed while it is highlighted, the
load operation is interrupted.
[EXECUTE] key is highlighted.
If the [EXECUTE] key is pressed while it is highlighted, the
load operation is interrupted.
4
4 - 2
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to check the operation of sensors and detectors
in the paper feed section (desk feed, large capacity
tray) and the related circuit.
in the paper feed section (desk feed, large capacity
tray) and the related circuit.
Section
Paper transport
Item
Operation
Operation/
Procedure
Procedure
The operting conditions of the sensors and detectors in
the paper feed section are displayed.
The active sensors and detectors are highlighted.
the paper feed section are displayed.
The active sensors and detectors are highlighted.
Desk Unit Sensor
DDOPSW
Door open sensor
DPOD1
Paper exit transport sensor 1cs
DPOD2
Paper exit transport sensor 2 cs
DPOD3
Paper transport sensor 3cs
DLUD1
1cs Lift upper limit sensor
DPED1
1cs Paper empty sensor
DCSPD1
1cs remaining quantity detection 1
DLUD2
2xs lift upper limit sensor
DPED2
2cs paper empty sensor
DCSPD2
2cs remaining quantity detection 1
DLUD3
3cs lift upper limit sensor
DPED3
3cs paper empty sensor
DCSPD3
3cs remaining quantity detection 1
FOUND1
1cs lift unit detection (Installation detection)
FOUND2
2cs lift unit detection (Installation detection)
FOUND3
3cs lift unit detection (Installation detection)
DCSS11
1cs size detection 0
DCSS12
1cs size detection 1
DCSS13
1cs size detection 2
DCSS14
1cs size detection 3
DCSS21
2cs size detection 0
DCSS22
2cs size detection 1
DCSS23
2cs size detection 2
DCSS24
2cs size detection 3
DCSS31
3cs size detection 0
DCSS32
3cs size detection 1
DCSS33
3cs size detection 2
DCSS34
3cs size detection 3
LCC Unit Sensor
LRE
Remaining quantity sensor
LUD
Upper limit sensor
LDD
Lower limit sensor
LPED
Paper empty sensor
LPFD
Paper exit sensor
LDSW
Door open SW
LTOD
Body connection sensor
LCD
Cassette detection line
4 - 3
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to check the operation of the loads in the paper
feed section (desk paper feed, large capacity tray) and
the control circuits.
feed section (desk paper feed, large capacity tray) and
the control circuits.
Section
Paper transport
Item
Operation
Operation/
Procedure
Procedure
1. The names of the loads which can be operated are
displayed.
Select the load to be checked with the key, and the
selected load is highlighted.
Select the load to be checked with the key, and the
selected load is highlighted.
2. Press the [EXECUTE] key.
The load selected in procedure 1 starts the operation.
AR-505
8/6/1999
7 – 10
Click on the first or last page to see other AR-505 (serv.man9) service manuals if exist.