AR-407 (serv.man4). AR287 337 407 507-Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 18

When the SCSI channel is set to "20," if a software key which
does not correspond to the setup is entered, the setup of "20" is
changed to "1."

Purpose

Setting

Function
(Purpose)

Used to enter the Diagnosis function key input. 

Item

Operation

Operation/
Procedure

1. After entering the sub code of the simulation, enter

the software key in the obtained frame of "NEW."

2. When the obtained number is entered with the 10-key (max. 9 dig-

its), the entered number is displayed in the frame of "NEW." After
entering the number, press the [OK] key, and the entered number
is stored.

3. The Alert/Status E-Mail send function with attached data of the

Remote E-Mail Diagnosis System is enabled. 

Purpose

Setting

Function
(Purpose)

After completion of copier job in copier interruption dur-
ing a printer job, the print job is resumed in synchroni-
zation with the auto clear timer (key operation) setup
time [10-240]. By making the setup below, the print job
is resumed in 0 sec. (However, the auto clear function
is enabled with the setup time of key operation. Also,
this simulation and auto clear are not synchronized.)

Item

Operation

Operation/
Procedure

When this simulation is executed, the current set value
is displayed. At that time, the set value can be changed
with the 10-key.
When the [OK] key is pressed, the current set value is
stored in the EEPROM.

Purpose

Setting

Function
(Purpose)

Used to set the specification (language display) for the
destination. (Excluding the Japan models.)

Item

Specifications

Operation/
Procedure

Select the language to be used according to the table
below. 

Display Language 

ENG.(US)

English(US)

ENG.(UK)

English(UK)

FRENCH

French

SPANISH

Spanish

GERMAN

German 

ITALIAN

Italian

SWEDISH

Swedish

DUTCH

Dutch

Purpose

Setting

Function
(Purpose)

When the variable speed fan motor is in the ready state
and the process temperature is in the range of 36° –
45°, the PWM duty is set in percentage.

Item

Operation

Operation/
Procedure

When this simulation is executed, the current set value
is displayed. At that time, select the fan motor with [

­

]

key and [

¯

] key. Then the set value can be changed

with the 10-key. 

When [

­

] key or [

¯

] key is pressed, the current set value is stored in

the EEPROM. 

VFM1&2&4

Adjustment range of 50 – 100% in 1% increment

PCFM VFM5&6 Adjustment range of 50 – 100% in 1% increment

Purpose

Setting

Function
(Purpose)

Used to set the model of the unit which is connected to
the SCSI I/F of ICU PWB.

Section

ICU

Item

Specifications

Interface/Communication

Operation/
Procedure

A is at the left of B when viewed from the rear side.

 0:

No connection

 1:

Printer controller

  3:

External printer controller

AR-287/337

AR-407/507

4/5/2000

7 – 54