AR-280 (serv.man12). AR280 285 335 Service Manual-Simulation Codes - Sharp Copying Equipment Service Manual (repair manual). Page 7

Code

Function (Purpose)

Purpose

Section

Item

Main

Sub

22

10

Used to check the system configuration
(option, internal hardware).

Operation data
output/Check
(Display/Print)

Specifications

Options

11

Used to check the use frequency of FAX
(send/receive). (Target models:
AR-F230/S280/F280S/F280R)

Operation data
output/Check
(Display/Print)

FAX

Data

Operation data
(Machine
condition)

12

Used to check the misfeed positions and
the number of misfeed at each position.
(When the number of misfeed is
considerably great, is can be judged as
necessary for repair.)

Operation data
output/Check
(Display/Print)

ADF/RADF/UDH/SPF

Trouble

Mis-feed

24

1

Used to clear the misfeed counter, the
misfeed history, the trouble counter, and
the trouble history. (The counters are
cleared after completion of maintenance.)

Data clear

Counter

2

Used to clear the number of use (the
number of prints) of each paper feed
section.

Data clear

Paper transport

Counter

3

Used to clear the data of the number of
use of the staple, the ADF, RADF, SPF
and scanning.

Data clear

Counter

4

Used to reset the maintenance counter.

Data clear

Counter

5

Used to reset the developer counter. (The
developer counter of the DV unit which is
installed is reset.)

Data clear

Image process
(Photoconductor/
Developing/Transfer/
Cleaning)

Developer/
Toner Hopper

Counter

Developer

6

Used to reset the copy counter.

Data clear

Counter

Copier

7

Used to clear the OPC drum (membrane
decrease) correction counter. 
(This simulation is executed when the
OPC drum is replaced.

Data clear

Image process
(Photoconductor/
Developing/Transfer/
Cleaning)

Photo
conductor

Counter

Photo
conductor

8

Used to clear the Zaurus print counter.

Data clear

Counter

Others

9

Used to clear the printer print counter.
(The counter is cleared after completion of
maintenance.)

Data clear

Printer

Counter

Printer

10

Used to clear the FAX counter. (The
counter is cleared after completion of
maintenance.)

Data clear

FAX

Counter

25

1

Used to check the operation of the main
drive (excluding the scanner section) amd
to check the operation of the toner
concentration sensor. (The toner
concentration sensor output can be
monitored.)

Operation test/check

DRIVE

Operation

2

Used to make the initial setting of toner
concentration when replacing developer.

Setting

Image process
(Photoconductor/
Developing/Transfer/
Cleaning)

Developer/
Toner Hopper

26

1

Used to set options. (This simulation is
used to make option setting when an
option is installed.)

Setting

Specifications

Options

2

1) Used to set the paper size of the large
quantity paper tray. (When the paper size
is changed, the lift paper size must be
also changed with this simulation.)
2) Used to detect the paper or document
size of 8.5" x 13" (Inch series) and set the
display mode. (All paper feed modes)

Setting

Paper transport

Specifications

3

Used to set the specifications of the
auditor. Setting must be made depending
on the use condition of the auditor.

Setting

Auditor

Specifications

5

Used to set the count mode of the total
counter and the maintenance counter.

Setting

Specifications

Counter

6

Used to set the specifications depending
on the destination.

Setting

Specifications

Destination

15

Used to set the fusing operation mode
(paper curl corresponding mode).

Setting

Fixing (Fusing)

Operation

8 – 5