Read Sharp AR-275 (serv.man2) Handy Guide online
AR-235/275
Technical Information Pack
Document Systems Support
24
Material Safety Data Sheet (2/2)
MSDS No. F-00981
Section 5. Health Hazard Data (Continued)
Section 5. Health Hazard Data (Continued)
Emergency and First Aid Procedures :
Inhalation; Remove to fresh air. If effects occur, consult medical personnel.
Eye: In case of contact, immediately flush eyes with water for 15 minutes.
Eye: In case of contact, immediately flush eyes with water for 15 minutes.
Section 6. Physical Chemical Characteristics
Boiling Melting Point
:
Not applicable Specific Gravity :1.1
Vapor Pressure :
Not applicable Solubility in Water:
Negligible
Vapor Density
:
Not applicable PH:Not applicable
Evaporation Rate
:
Not applicable Viscosity:Not applicable
Appearance
:
Fine powder Color:Black
Odor
:
Odorless
Section 7. Fire and Explosion Data
Flash Point (Method Used)
:Not applicable
Ignition Temperature
:350
0
C
Flammable Limits
:(LEL); Not applicable (UEL); Not applicable
Extinguishing Media
:CO2, dry chemical, foam or water
Special Fire Fighting Procedure
:None
Unusual Fire and Explosion Hazard
:This material has no unusual fire or explosion hazards.
Sensitivity to Mechanical Impact :None
Sensitivity to Static Charge
Sensitivity to Static Charge
:None
Section 8. Reactivity Data
Stability :Stable
Incompatibility (Material to Avoid)
Incompatibility (Material to Avoid)
:None
Hazardous Decomposition
:CO and NOx
Hazardous Polymerization
:Will not occur.
Section 9. Precautions for Safe Handling and Use
Personal Protection Information (Respiratory, Eye Protection and Protective Glove): Use of a dust mask is
recommended when handling a large quantity of toner or during long term exposure, as with any non-toxic dust.
Engineering Control / Ventilation :Not required.
Work / Hygienic Practice :Inhalation should be minimized as with any non-toxic dust.
Steps to be taken in case of Spill or Leak :Sweep up or clean up with vacuum cleaner.
Waste Disposal Method :Waste material may be dumped or incinerated under conditions which meet all
federal, state and local environmental regulations.
recommended when handling a large quantity of toner or during long term exposure, as with any non-toxic dust.
Engineering Control / Ventilation :Not required.
Work / Hygienic Practice :Inhalation should be minimized as with any non-toxic dust.
Steps to be taken in case of Spill or Leak :Sweep up or clean up with vacuum cleaner.
Waste Disposal Method :Waste material may be dumped or incinerated under conditions which meet all
federal, state and local environmental regulations.
Section 10. Regulatory Information
NFPA Rating (U.S.A.) :Health = 1
NFPA Rating (U.S.A.) :Health = 1
Flammability = 1
Reactivity = 0
WHMIS Legislation (Canada) :This product is not a controlled product.
Transport Information :This product is not a hazardous material.
UN No. :None allocated.
Transport Information :This product is not a hazardous material.
UN No. :None allocated.
Section 11. Other Information
References : IARC (1996) IARC Monographs on the Evaluation of the Carcinogenic Risk of Chemicals to
Humans, Vol. 65, Printing Process and Printing inks, Carbon Black and Some Nitro Compounds, Lyon, pp-149-
261 H. Muhle, B. Bellmann, O. Creutzenberg, C. Dasenbrock, H. Ernst, R. Kilpper, J. C. MacKenzie,
Humans, Vol. 65, Printing Process and Printing inks, Carbon Black and Some Nitro Compounds, Lyon, pp-149-
261 H. Muhle, B. Bellmann, O. Creutzenberg, C. Dasenbrock, H. Ernst, R. Kilpper, J. C. MacKenzie,
P. Morrow,
U. Mohr, S. Takenaka, and R. Mermelstein (1991) Pulmonary Response to Toner upon Chronic
Inhalation Exposure in Rats. Fundamental and Applied Toxicology 17, pp. 280-299
Inhalation Exposure in Rats. Fundamental and Applied Toxicology 17, pp. 280-299
Click on the first or last page to see other AR-275 (serv.man2) service manuals if exist.