Read Sharp AR-206 Handy Guide online
Firmware Upgrading
Version 2.6
Issue 12/02
32
SHARP ELECTRONICS (UK) LTD
DOCUMENT SYSTEMS SUPPORT
TECHNICAL SERVICES GROUP
AR161 / AR200 / DM2000 / AR205
(PANTHER)
(PANTHER)
AR161
AR200
DM2000
AR205
Revision/Correction Made
1.01
Production of AR161 started.
1.14
Start of AB production.
1.25
To support 20cpm range (AR200 released).
3.00
3.00
To support the AR-PB8 printer board.
4.01
4.01
To support the AR-EB3 electronic sort board
To unify the AR161/200 firmware.
Test Sim. 26-51 was added (Technical Information PANTHER-4).
To unify the AR161/200 firmware.
Test Sim. 26-51 was added (Technical Information PANTHER-4).
4.10
4.10
Changes were made so that the full LED would light up and the copy button flashes if a copy job is stopped with
Sim 26-1 value was set to "1".
"CH" is indicated when the side cover of the base plate is opened.
Sim 26-1 value was set to "1".
"CH" is indicated when the side cover of the base plate is opened.
DM2000 was released (DM2000 firmware version 5.05)
10.00 AR200 was released.
5.08
5.08
10.08 Modification for envelope jamming was implemented.
5.11
5.11
10.09 Timing for picking up paper was changed when using the bypass tray.
(When running multi-copy from the bypass, if the pick up roller slips and the paper transportation is delayed, the
next
paper will be picked up while the paper detection sensor in "ON", causing a paper jam)
next
paper will be picked up while the paper detection sensor in "ON", causing a paper jam)
5.16
5.16
The firmware was changed as the AR-FX2 for SUK was released.
5.17
5.17
Common firmware version to support AR-FX2 for all destinations.
5.22
5.22
10.15 In compliance with the request from SEC/SECL, the spec for the indication for multi-access was changed.
5.23
5.23
10.16 Changes were made as the firmware for Japan & Overseas were unified.
5.27
5.27
10.17 Formerly, the adjustment value for the option cassette registration was "1" and the setting could not be made
smaller-
The change was made so that the default value is "50".
The default value for CE-complied machine was changed from "1" to "0".
Formely, when a paper misfeed occurred at the paper reversing path during duplexing copying, the job was
cancelled
with CA key. Then the machine kept counting a simplex job as a duplex job - This problem is corrected.
The trouble of H4 occurring 1 minute after executing Sim5-2 has been corrected.
The change was made so that the default value is "50".
The default value for CE-complied machine was changed from "1" to "0".
Formely, when a paper misfeed occurred at the paper reversing path during duplexing copying, the job was
cancelled
with CA key. Then the machine kept counting a simplex job as a duplex job - This problem is corrected.
The trouble of H4 occurring 1 minute after executing Sim5-2 has been corrected.
10.18 Sim 26-03/-5/06/10/22/30/32/42/50/51, Sim46-01, Sim48-01 & Sim50-01 could not be reprogrammed onto
EEPROM in
MCU PWB. The problem is now corrected.
MCU PWB. The problem is now corrected.
5.28
5.28
10.19 Sin 26-03/05/06/10/22/30/32/42/50/51, Sin46-01, Sin48-01 & Sim 50-01 could not be programmed onto
EEPROM in MCU PWB. The problem is now corrected. (not AR205).
Counter failure when duplex printing is corrected (single sided counting instead of double sided).
Counter failure when duplex printing is corrected (single sided counting instead of double sided).
5.29
5.29
Jam detection did not function correctly when the last sheet got double fed and an extra sheet was left at the PS
sensor after the last sheet exited.
sensor after the last sheet exited.
5.32
5.32
10.22 Oct’02. Countermeasure against SPF black lines, and E7-04 errors.
Click on the first or last page to see other AR-206 service manuals if exist.