Read Sharp AR-206 Handy Guide online
Firmware Upgrading
Version 2.6
Issue 12/02
31
SHARP ELECTRONICS (UK) LTD
DOCUMENT SYSTEMS SUPPORT
TECHNICAL SERVICES GROUP
The AR161/200 and 205 can be flash upgraded using the appropriate equipment, and
following the procedures as set out below.
following the procedures as set out below.
Equipment
1. Machine (i.e. AR161, AR200 or AR205)
2. PC ( operating Windows 95 or 98 )
3. Level Converter ( UKOG-0002QSZZ )
Procedures
a. Turn off the power to the machine.
b. Connect the level converter between the PC and the P2 socket on the
centre/rear frame side of the machine.
c. Start Windows on your PC and locate the latest version programme from
your files. ( if you do not have the programmes they can be obtained from
the Sharp technical website @
the Sharp technical website @
WWW.TRADENET.SHARP.CO.UK/TECH
)
d. Switch on the machine. If everything is connected properly the machines
screen will remain blank.
e. Execute “ maintenance- versionxxx.exe on the PC.
f. Select
“ Program Data Download “ in the SPECIAL folder and follow the
menu on the PC to transfer data.
g. Select the data for the MCU to be transferred and execute.
h. If an electronic sort board AR-EB3 is fitted select and execute the data for it.
i. On successful completion of the data transfer switch off the machine and
disconnect the PC and level converter.
j. Switch on the machine and check in Simulation 22-14 that ROM version is
correct.
Click on the first or last page to see other AR-206 service manuals if exist.