AR-155 (serv.man11). AR150 155 ARF151 Service Manual-Simulation Fax Software Switch Trouble Codes - Sharp Copying Equipment Service Manual (repair manual). Page 20

Read Sharp AR-155 (serv.man11) Service Manual online

(9) Panel check mode
Procedure
LCD
Operation
1
Press FUNCTION, 9, 
∗, 8, #, 7.
DIAGNOSTIC MODE
ROM VERSION =
<version>
2
Press ENTER.
DIAGNOSTIC MODE
SELECT MENU(
←  →)
3
Press 4, 2.
42:FAX PANEL TEST
4
Press any key.
42:FAX PANEL TEST
<key name>
The name of the pressed key is displayed in the
lower stage of the LCD.
5
Press STOP.
This mode is terminated.
(10) Signal detect mode
Procedure
LCD
Operation
1
Press FUNCTION, 9, 
∗, 8, #, 7.
DIAGNOSTIC MODE
ROM VERSION =
<version>
2
Press ENTER.
DIAGNOSTIC MODE
SELECT MENU(
←  →)
3
Press 4, 3.
43:SIG. DETECT
4
(When DTMF signal is detected)
43:SIG. DETECT
DTMF:<number>
(When CNG signal is detected)
43:SIG. DETECT
CNG
(When QUIET signal is detected)
43:SIG. DETECT
QUIET
(To terminate this mode)
Press STOP.
This mode is terminated.
(11) Long distance comm select mode
Procedure
LCD
Operation
1
Press FUNCTION, 9, 
∗, 8, #, 7.
DIAGNOSTIC MODE
ROM VERSION =
<version>
2
Press ENTER.
DIAGNOSTIC MODE
SELECT MENU(
←  →)
3
Press 4, 4.
44:LONG DIST COMM
1:SET 2:CLEAR
To terminate this mode, press STOP.
4
Select the mode.
To register 
→ 10
To cancel registration 
→ 20
10
Press 1.
SET
ENTER # OR RAPID
11
Press the desired one touch key or the speed
dial (2 digits) to be registered.
SELECT SPEED
1:9600BPS 2:4800BPS
12
Select the speed. (Press 1 or 2.)
<Name or Number>
STORED
13
Return to 3.
20
Press 2.
CLEAR
ENTER # OR RAPID
21
Press the desired one-touch key or speed dial (2
digits) to be canceled.
<Name or Number>
CLEARED
22
Return to 3.
Note:
● One-touch keys and speed dials which are not registered cannot be designated.
● When one-touch keys and speed dials which are registered are canceled, this setup is also canceled.
● The group key and the polling key cannot be designated.
AR-F151
9  – 19
Page of 31
Display

Click on the first or last page to see other AR-155 (serv.man11) service manuals if exist.