AR-155 (serv.man11). AR150 155 ARF151 Service Manual-Simulation Fax Software Switch Trouble Codes - Sharp Copying Equipment Service Manual (repair manual). Page 18

Read Sharp AR-155 (serv.man11) Service Manual online

Procedure
LCD
Operation
32
When the target speed is displayed, press ENTER.
<signal speed>
SELECT DATA
33
Press 
← or → to select the target data to be sent.
<data>
PRESS ENTER KEY
For <data>, refer to TABLE-5.
34
When the target data is displayed, press ENTER.
<signal speed>
<data>
The selected signal is sent.
35
Press STOP.
<signal speed>
SELECT DATA
Signal send stop
36
(To change data only)
Go to 33.
(To change speed)
Press STOP.
<signal type>
SELECT SPEED
(To change the signal kind)
Press STOP twice.
04:SIGNAL SEND
SELECT SIGNAL
(To terminate this mode)
Press STOP 3 times.
This mode is terminated.
40
7:TONE
SELECT FREQUENCY
41
Press 
← or → to select the target frequency.
<signal freq.>
PRESS ENTER KEY
For <signal freq.>, refer to TABLE-4.
42
When the target frequency is displayed, press
ENTER.
<signal freq.>
The selected signal is sent.
43
Press STOP.
7:TONE
SELECT FREQUENCY
Signal send stop
44
(To change the frequency only)
Go to 41.
(To change the signal kind)
Press STOP.
04:SIGNAL SEND
SELECT SIGNAL
(To terminate this mode)
Press STOP twice.
This mode is terminated.
TABLE-3: Signals in the Signal send mode
MODE #
MENU
DISPLAY
1
No signal
1:NO SIGNAL
2
DTMF
2:DTMF
3
V.17
3:V.17
4
V.29
4:V.29
5
V27ter
5:V27ter
6
FLAG
6:FLAG
7
Tone (CED/CNG)
7:TONE
TABLE-4: Speed/Frequency in the Signal send mode
MODE #
MENU ITEM 1
MENU ITEM 2
MENU ITEM 3
MENU ITEM 4
3
1:V.17 14400BPS
2:V.17 12000BPS
3:V.17 9600BPS
4:V.17 7200BPS
4
1:V.29 9600BPS
2:V.29 7200BPS
5
1:V27ter 4800BPS
2:V27ter 2400BPS
6
1:FLAG 300BPS
7
1:TONE 2100Hz
2:TONE 1100Hz
TABLE-5: Data which is sent in the Signal send mode
MODE #
MENU (DATA)
DISPLAY
1
00000000b
1:00000000b
2
11111111b
2:11111111b
3
01010101b
3:01010101b
AR-F151
9  – 17
Page of 31
Display

Click on the first or last page to see other AR-155 (serv.man11) service manuals if exist.