Read Sharp AM-400 (serv.man9) Service Manual online
AM-400DE
1 – 13
9. Clearing jammed printing paper
1) Press the side cover release
and then open the side cover
.
2) Push the two heater roller release levers down to release the
heater roller.
• Caution! The fusing unit (indicated in white at right) becomes
very hot during operation. Do not touch the fusing unit.
• Caution! The fusing unit (indicated in white at right) becomes
very hot during operation. Do not touch the fusing unit.
3) If the jammed page is protruding from the side of the machine, gen-
tly pull it out. Take care not to tear the paper or leave any torn
pieces of paper in the print compartment.
• If this clears the jam, go to Step 5.
• If you are unable to clear the jam in this way, go to Step 4.
• Take care not to touch or allow other objects to contact the drum
(the green cylinder). This damage the drum.
pieces of paper in the print compartment.
• If this clears the jam, go to Step 5.
• If you are unable to clear the jam in this way, go to Step 4.
• Take care not to touch or allow other objects to contact the drum
(the green cylinder). This damage the drum.
4) If the jammed page cannot be pulled out directly, open the front
cover
and rotate the white knob
in the direction
shown to feed the jammed page out into the output tray.
5) After the jammed page has been removed, push the two heater
roller release levers back up.
6) Close the front cover
(if you opened it) and then the side
cover
.
Note: If you find that another paper jam occurs immediately after
clearing a paper jam, open the side cover and then the front cover
and remove the jammed paper as explained above. With the front
cover and side cover still open, remove the output tray and remove
the printing paper from the paper tray. Replace the output tray and
close the front cover and then the side cover. Remove the output
tray once again, fan printing paper, replace it in the paper tray, and
then replace the output tray.
clearing a paper jam, open the side cover and then the front cover
and remove the jammed paper as explained above. With the front
cover and side cover still open, remove the output tray and remove
the printing paper from the paper tray. Replace the output tray and
close the front cover and then the side cover. Remove the output
tray once again, fan printing paper, replace it in the paper tray, and
then replace the output tray.
1
2
1
2
1
2
2
1
1
2
2
1
Click on the first or last page to see other AM-400 (serv.man9) service manuals if exist.