AM-400 (serv.man9). Chapter 1 (General Description). - Sharp Copying Equipment Service Manual (repair manual). Page 12

AM-400DE

1 – 12

16)When the wizard finishes installing the printer software, click Finish

to close the Wizard. This completes the installation of the software
on Windows

®

 XP.

For information on using Sharpdesk, view the Sharpdesk online
guide on the CD-ROM. To view the online guide, open the Manual
folder and then the EnglishA folder on the CD-ROM, and double-
click SDUG_Enu.pdf.

In the event that you need to remove the software from your com-
puter, follow the steps below.

1) Disconnect the USB cable from your computer and the machine.

2) Open the Control Panel and select Add or Remove Programs
(or Add/Remove Programs).

3) Select SHARP AM-400 Series MFP Driver (or Sharpdesk)
from the list, and click the Change/Remove button (or the Add/
Remove button).

4) Click OK to confirm the removal.

If the original document doesn’t feed properly during transmission or
copying, or DOCUMENT JAMMED appears in the display, first try

pressing 

 . If the document doesn’t feed out, open the auto

document feeder cover and remove it.

Do not try to remove a document without opening the auto document
feeder cover. This may damage the feeder mechanism.

1) Squeeze the cover release 

 and open the auto document

feeder cover. Open the document glass cover.

2) Remove the document.

• The document can be removed from either the top or the bottom

slot, whichever is easiest.

3) Close the auto document feeder cover, pressing down on both

sides to make sure it clicks into place.

1

1

Press down

on the marks