Read Sharp AM-400 (serv.man9) Service Manual online
AM-400DE
1 – 16
Install the software on your computer. (The software
allows the machine to be used as a printer and scanner.)
allows the machine to be used as a printer and scanner.)
9
1. Make sure that a USB cable is not connected
to the machine and your computer.
(The cable
will be connected in Step 11.)
•
If a cable is connected and a Plug and Play window appears, close
the window and disconnect the cable.
2. Insert the Sharp CD-ROM into your computer's
CD-ROM drive.
3. Windows XP: Click the start button, click My
Computer
, and double-click the CD-ROM icon.
Windows Me/2000: Double click My Computer on
the desktop and double-click the CD-ROM icon.
4. Double-click the setup icon (
) in the CD-
ROM window.
5. If the Language Selection window appears,
select the language that you wish to use and click
Next
Next
(the language selections will vary depending
on your country or region).
6. Follow the on-screen instructions.
•
When the Setup Type Selection window appears, select
Standard
Standard
to install all of the software components (this should
normally be selected). If you only wish to install certain
components, select Custom and then select the components
that you wish to install.
•
In Windows 2000/XP, if a warning message appears at any time
regarding the Windows logo test or digital signature, be sure to click
Continue Anyway
or Yes.
7. When the Finish window appears to indicate that the
selected packages have been installed, click Close.
8.
If the installation was a Standard installation, the
following window will appear. Click OK.
•
If you installed the MFP drivers using a Custom installation
and did not install Sharpdesk, the following window will
appear. Click OK and go to Step 11.
9.
The following window will appear. Click Yes to restart
your computer.
10. The Search Setup Wizard will appear. Follow the
on-screen instructions to create an index
database for Sharpdesk.
11. Make sure that the machine's power cord is not
plugged in, and then connect the USB cable to the
USB port on the machine and on your computer.
12. Plug in the machine's power cord.
•
Windows XP
: Follow Steps 13 through 16 to
complete the installation of the software.
•
Windows 2000
: This completes the installation of the
software.
Note:
Note:
If a warning message regarding the Windows logo
test appears (the warning may appear twice), click Yes
each time the window appears. This will complete the
installation of the software.
•
Windows Me
: This completes the installation of the
software.
Note:
Note:
In the power management settings in the Control
Panel, System stand by
must be set to Never.
Completing the installation on Windows XP
13. In Windows XP, the Found New Hardware
13. In Windows XP, the Found New Hardware
Wizard
will appear. Make sure that Install the
software automatically (Recommended)
is
selected and click Next.
Note for Windows XP SP2
Note for Windows XP SP2
: The first window of the
wizard will ask you if the wizard can connect to Windows
Update. Select No, not this time and click Next.
•
If a warning message appears regarding the Windows
logo test, click Continue Anyway.
14.
When the wizard finishes installing the software, click
Finish
Finish
to close the wizard.
15. After a brief interval, the Found New Hardware
Wizard
will appear again. Make sure that Install
the software automatically (Recommended)
is
selected and click Next.
•
If a warning message appears regarding the Windows
logo test, click Continue Anyway.
16. When the wizard finishes installing the software,
click Finish to close the wizard. This completes
the installation of the software on Windows XP.
Note:
A USB 2.0 or 1.1 cable is required to connect the
machine to your computer. Please purchase this separately.
10
Configure Button Manager (one of the programs installed in the above step) as
the program on your computer that handles scanner events from the machine.
the program on your computer that handles scanner events from the machine.
Windows XP/Me
1. Click the start button, click Control Panel, and
1. Click the start button, click Control Panel, and
double-click Scanners and Cameras.
•
If Scanners and Cameras does not appear in Windows
Me, click view all Control Panel options.
2. Right-click the SHARP AM-400 icon and
select Properties.
3. The SHARP AM-400 Properties appear.
Click on the Events tab.
4. Select SC1 from the Select an event list.
5. In the Actions field, select Start this program
5. In the Actions field, select Start this program
and then select Sharp Button Manager I from the
list of programs. Click Apply.
6. Repeat Steps 4 and 5 for each of events SC2
through SC6. When finished, click the OK button.
Windows 2000
1. Click the Start button, point to Settings, and
1. Click the Start button, point to Settings, and
select Control Panel.
2. In the Control Panel, double-click Scanners and
Cameras
.
3. Select SHARP AM-400 and click Properties.
4. Click the Event s tab in the SHARP AM-400
4. Click the Event s tab in the SHARP AM-400
Properties
.
5. Select SC1 from the Scanner events list.
6. In Send to this application, select Sharp
6. In Send to this application, select Sharp
Button Manager I
.
•
If other applications appear in the list, make sure that
none are selected.
7. Click the Apply button.
8. Repeat Steps 5 through 7 for each of events SC2
8. Repeat Steps 5 through 7 for each of events SC2
through SC6. When finished, click the OK button.
R
R
R
R
R
R
R
R
R
R
R
R
