AM-300 (serv.man9). Chapter 1 (General Description). - Sharp Copying Equipment Service Manual (repair manual). Page 10

AM-300DE

1 – 10

9) The following window will appear. Click Yes to restart your com-

puter.

10)The  Search Setup Wizard will appear. Follow the on-screen

instructions to create an index database for Sharpdesk.

11)Make sure that the power cord of the machine is not plugged in

(the machine is powered off), and then connect the USB cable.
• Insert one end of the USB cable into the USB port on the machine
and the other end into your computer’s USB port.

Comments:
• Do not connect the AM-300 to a hub to which another AM-300 is
connected. If this is done, the AM-300 will not operate correctly.
• If you find that your computer does not recognize the machine or
operation is unstable, try connecting the USB cable to a different
USB port on your computer, or try a different USB cable (use the
shortest possible cable).

12)Plug in the power cord of the machine.

• Windows

®

 XP: Go to the procedure for completing installation of

the software on Windows XP below.

• Windows

®

 2000: This completes the installation of the software.

Note: If a warning message regarding the Windows logo test
appears (the warning may appear twice), click Yes each time the
window appears. This will complete the installation of the software.

• Windows

®

 Me: This completes the installation of the software.

®

 XP

13)In Windows

®

 XP, the Found New Hardware Wizard will appear.

Make sure that Install the software automatically (Recom-
mended) is selected and click Next (this will install software for
using the machine as a scanner).

• Note for Windows

®

 XP SP2: The following window will appear

first. Select No, not this time and click Next. Continue from the
previous window.

• If the following warning message appears regarding the Windows
logo test, click Continue Anyway.