AM-300 (serv.man9). Chapter 1 (General Description). - Sharp Copying Equipment Service Manual (repair manual). Page 12

AM-300DE

1 – 12

If the original document doesn’t feed properly during transmission or
copying, or DOCUMENT JAMMED appears in the display, first try

pressing 

 . If the document doesn’t feed out, open the auto

document feeder cover and remove it.

Do not try to remove a document without opening the auto document
feeder cover. This may damage the feeder mechanism.

1) Squeeze the cover release 

 and open the auto document

feeder cover. Open the document glass cover.

2) Remove the document.

• The document can be removed from either the top or the bottom

slot, whichever is easiest.

3) Close the auto document feeder cover, pressing down on both

sides to make sure it clicks into place.

1) Press the side cover release 

 and then open the side cover

.

2) Push the two heater roller release levers down to release the

heater roller.
•  Caution! The fusing unit (indicated in white at right) becomes
very hot during operation. Do not touch the fusing unit.

3) If the jammed page is protruding from the side of the machine, gen-

tly pull it out. Take care not to tear the paper or leave any torn
pieces of paper in the print compartment.
• If this clears the jam, go to Step 5.
• If you are unable to clear the jam in this way, go to Step 4.
• Take care not to touch or allow other objects to contact the drum
(the green cylinder). This damage the drum.

1

1

Press down

on the marks

1

2

1

2