Read Sharp AL-1644 (serv.man12) Service Manual online
AL-1633/1644 USER PROGRAMS 8-2
Program name
Program
No
Description
Default
Parameters
Key auto repeat
25
Use this setting to select whether or not holding down a key causes
repeated input of the key. For keys that normally cause a set value to
increase when held down (for example, holding down the [ZOOM]
key), this program can be used to have the set value not change
when the key is held down.
repeated input of the key. For keys that normally cause a set value to
increase when held down (for example, holding down the [ZOOM]
key), this program can be used to have the set value not change
when the key is held down.
ON
0 (OFF)
1 (ON)
Key press time
26
Use this setting to select how long a key must be pressed for the
input to be accepted. By selecting a longer time, you can prevent
settings from being changed by the accidental pressing of a key.
input to be accepted. By selecting a longer time, you can prevent
settings from being changed by the accidental pressing of a key.
Minimum
(current
response
speed)
1 (Minimum
(current response speed))
(current response speed))
2 (0.5sec)
3 (1.0sec)
4 (1.5sec)
5 (2.0sec)
Audible signals volume
27
This sets the volume of beep signals.
Low
(current
volume)
1 (Low (current volume))
2 (High)
3 (OFF)
Base setting beep signal
28
Use this to sound a beep when a base setting is selected.
OFF
0 (OFF)
1 (ON)
Number of copies limit
29
Use this setting to select 99 or 999 for the maximum number of
copies.
copies.
999 copies
1 (99 copies)
2 (999 copies)
Use close paper size
30
When this function is enabled, printing in printer mode will
automatically continue using a different size of paper if the specified
size of paper runs out in all trays. This feature does not function in
copy mode.
automatically continue using a different size of paper if the specified
size of paper runs out in all trays. This feature does not function in
copy mode.
OFF
0 (OFF)
1 (ON)
Default tray setting
31
Use this program to select a default tray. This tray is automatically
selected each time the power is turned on or each time the machine
reverts to the initial settings.
selected each time the power is turned on or each time the machine
reverts to the initial settings.
Tray 1
1 (Tray 1)
2 (Tray 2)
5 (Bypass tray)
Default exposure mode
32
Use this program to set "AUTO", "TEXT", or "PHOTO" as the default
exposure mode.
exposure mode.
AUTO
1 (AUTO)
2 (TEEXT)
3 (PHOTO)
[08]USERPROGRAMS.fm 2 ページ 2003年11月28日 金曜日 午前9時17分
Display