AL-1644 (serv.man12). User programs - Sharp Copying Equipment Service Manual (repair manual)

al-1644 (serv.man12) service manual
Model
AL-1644 (serv.man12)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
71.38 KB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / User programs
File
al-1644-sm12.pdf
Date

Read Sharp AL-1644 (serv.man12) Service Manual online

AL-1633/1644 USER PROGRAMS 8-1
[8] USER PROGRAMS
The user programs allow the parameters of certain functions to be set, changed, or canceled as desired.
1. List of user programs
This copier has the following user programs. 
*1 On models with a SPF.
*2 On model with the two trays.
Program name
Program 
No
Description
Default
Parameters
Auto clear time
1
"Auto clear time" automatically returns the copy settings to the initial 
settings when a certain period of time elapses after a copy is made. 
This program is used to select the period of time. "Auto clear time" 
can also be disabled.
60sec
1 (OFF)
2 (10sec)
3 (20sec)
4 (60sec)
5 (90sec)
6 (120sec)
Preheat mode
2
This function automatically switches the machine to a low power 
consumption state if the set duration of time elapses without the 
machine being used when the power is on.
The POWER SAVE indicator lights up, however, the keys on the 
operation panel can be used. Normal operation automatically 
resumes when a key on the operation panel is pressed, an original 
is placed, a print job is received, or scanning is begun from a 
computer.
1min
1 (1min)
2 (5min)
3 (30min)
4 (60min)
5 (120min)
6 (240min)
Auto power shut-off timer
3
This function automatically switches the machine to a state that 
consumes even less power than preheat mode if the set duration of 
time elapses without the machine being used when the power is on. 
All lights except the POWER SAVE indicator and ON LINE indicator 
go off. To resume normal operation, press the [START] key. Normal 
operation also resumes automatically when a print job is received or 
scanning is begun from a computer. While in auto power shut-off 
mode, no keys (except the [START] key) can be used.
5min
1 (5min)
2 (30min)
3 (60min)
4 (120min)
5 (240min)
Stream feeding mode*
1
4
When copying using the SPF/RSPF, during the period of time that 
the SPF/RSPF indicator blinks after an original has been scanned 
(about 5 seconds), a subsequent original can be placed and 
automatically fed into the machine.
OFF
0 (OFF)
1 (ON)
Auto power shut-off 
setting
5
Use this setting to enable or disable auto power shut-off.
ON
0 (OFF)
1 (ON)
Auto paper select mode*
2
8
This function automatically selects paper that is the same size as 
the original placed in the SPF, or the same size as that selected with 
the [ORIGINAL SIZE ENTER] key. The function can be disabled.
ON
0 (OFF)
1 (ON)
Auto tray switching*
2
9
If the paper runs out during printing and there is paper of the same 
size and orientation in another tray, this function automatically 
switches to that tray (excluding the bypass tray). The function can be 
disabled.
ON
0 (OFF)
1 (ON)
Auditing mode
10
Use to enable or disable "Auditing mode".
"Auditing mode" is initially disabled.
OFF
0 (OFF)
1 (ON)
Account number entry
11
Use to set up account numbers. 
Up to 20 accounts can be established.
-
-
Account number change
12
Use to change an account number.
-
-
Account number deletion
13
Use to delete an account number.
A single account number can be deleted, or all account numbers at 
once.
Delete 
single 
account
0 (Delete single account)
1 (Delete all accounts)
Number of copies per 
account
14
This displays the number of copies made by each account.
The maximum count is 49,999. If this number is exceeded, the count 
will start over from 0.
-
-
Resetting account
15
Use to reset the copy count of an account to 0.
The copy count of a single account or of all accounts can be reset.
Reset single 
account
0 (Reset single account)
1 (Reset all accounts)
Offset of paper output tray
19
When enabled, this function offsets the position in the paper output 
tray of interrupt copy jobs , and print jobs when using the printer 
functoin.
ON
0 (OFF)
1 (ON)
Resolution in Auto/Text 
mode
23
The copy resolution in auto and text mode is normally 300 dpi. 
If high-quality copies are preferred, use this setting to change the 
resolution to 600 dpi.
300dpi
1 (300dpi)
2 (600dpi)
[08]USERPROGRAMS.fm  1 ページ  2003年11月28日 金曜日 午前9時17分
AL-1633/1644 USER PROGRAMS 8-2
Program name
Program 
No
Description
Default
Parameters
Key auto repeat
25
Use this setting to select whether or not holding down a key causes 
repeated input of the key. For keys that normally cause a set value to 
increase when held down (for example, holding down the [ZOOM] 
key), this program can be used to have the set value not change 
when the key is held down.
ON
0 (OFF)
1 (ON)
Key press time
26
Use this setting to select how long a key must be pressed for the 
input to be accepted. By selecting a longer time, you can prevent 
settings from being changed by the accidental pressing of a key.
Minimum 
(current 
response 
speed)
1 (Minimum
(current response speed))
2 (0.5sec)
3 (1.0sec)
4 (1.5sec)
5 (2.0sec)
Audible signals volume
27
This sets the volume of beep signals.
Low 
(current 
volume)
1 (Low (current volume))
2 (High)
3 (OFF)
Base setting beep signal
28
Use this to sound a beep when a base setting is selected.
OFF
0 (OFF)
1 (ON)
Number of copies limit
29
Use this setting to select 99 or 999 for the maximum number of 
copies.
999 copies
1 (99 copies)
2 (999 copies)
Use close paper size
30
When this function is enabled, printing in printer mode will 
automatically continue using a different size of paper if the specified 
size of paper runs out in all trays. This feature does not function in 
copy mode.
OFF
0 (OFF)
1 (ON)
Default tray setting
31
Use this program to select a default tray. This tray is automatically 
selected each time the power is turned on or each time the machine 
reverts to the initial settings.
Tray 1
1 (Tray 1)
2 (Tray 2)
5 (Bypass tray)
Default exposure mode
32
Use this program to set "AUTO", "TEXT", or "PHOTO" as the default 
exposure mode.
AUTO
1 (AUTO)
2 (TEEXT)
3 (PHOTO)
[08]USERPROGRAMS.fm  2 ページ  2003年11月28日 金曜日 午前9時17分
Page of 2
Display

Download Sharp AL-1644 (serv.man12) Service Manual (Repair Manual)

Here you can read online and download Sharp AL-1644 (serv.man12) Service Manual in PDF. AL-1644 (serv.man12) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AL-1644 (serv.man12) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.