Read Sharp AL-1622 (serv.man25) User Guide / Operation Manual online
56
GENERAL INFORMA
TION
Problem
Solution
●
Copier plugged in?
●
Power switch ON?
●
Copy density properly adjusted?
●
Is the original placed face down on
the original table or face up in the
SPF (AL-1622 only)?
the original table or face up in the
SPF (AL-1622 only)?
●
Paper too heavy?
●
Paper damp?
●
Is transfer charger clean?
●
Non-standard paper used?
●
Paper properly installed?
●
Pieces of paper inside copier?
●
Paper curled or damp?
Plug the copier into a grounded outlet.
See page 8.
See page 8.
Turn the power switch ON.
See page 17.
See page 17.
See pages 17 and 31.
Place the original face down on the original
table or face up in the SPF.
table or face up in the SPF.
Use copy paper within the specified range. See
page 59.
page 59.
Replace with dry copy paper.
Be sure to store copy paper in a dry location.
See page 60.
Be sure to store copy paper in a dry location.
See page 60.
Clean the transfer charger.
See page 55.
See page 55.
Use standard paper. If using special paper,
feed the paper through the bypass tray.
See pages 23 and 59.
feed the paper through the bypass tray.
See pages 23 and 59.
Make sure the paper is properly installed. See
pages 13 and 23.
pages 13 and 23.
Remove all pieces of misfed paper.
See page 39.
See page 39.
Store copy paper flat in the wrapper in a dry
location. See page 60.
location. See page 60.
Copier does not operate.
Copies are too dark or
too light.
too light.
Blank copies
Paper misfeeds frequently.
Copies smear if rubbed.
COPIER TROUBLE?
Copier trouble?
Striped copies
Click on the first or last page to see other AL-1622 (serv.man25) service manuals if exist.