AL-1611 (serv.man35). Information of parts change. 1 Fusing front PG change. 2 Roller pawl change. - Sharp Copying Equipment Technical Bulletin (repair manual). Page 2

Read Sharp AL-1611 (serv.man35) Technical Bulletin online

Sharp Electronics (UK) Ltd., Technical Services Group
DCE562
2. Roller pawl change.
1. Model Name
AL1611/1622/1644
2. General 
The roller pawl has been changed to standardise with other destinations.
3. Content
Current parts
New parts
No
Model
name
Version
P/G
No.
Parts code
Parts code
Pric
e
rank
Parts name
Effective
time
Inter-
change-
ability
Contents
*
1
10 -88
PTME-0032QSZZ
PTME-0032QSZ1
3
1
*
3
ALL
10 -8
PTME-0003QSZ1
PTME-0032QSZ1
AD
Roller pawl
'04/6
1
<Interchange>
1. Interchangeable.
4. Not Interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of related
parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with specified
ones for maintaining the safety and performance of the set.
Model Name *1 = AL1644
Model Name *3 = AL1611/1622
Page of 2
Display

Download Sharp AL-1611 (serv.man35) Technical Bulletin

Found More:

AL-1611 (serv.man35) Service Manuals

Preview DownloadPagesSize
AL-1611 (serv.man10) Simulations Service Manual 11 80.77 KB
AL-1611 (serv.man18) SPF parts arrangements Service Manual 1 361.48 KB
AL-1611 (serv.man17) Actual wiring diagram Service Manual 4 40.02 MB
AL-1611 (serv.man16) Circuit diagram Service Manual 2 42.87 KB
AL-1611 (serv.man15) Electrical section Service Manual 15 385.24 KB
AL-1611 (serv.man14) Flash ROM version up procedure Service Manual 2 1.52 MB
AL-1611 (serv.man13) Disassembly and assembly Service Manual 17 1.48 MB
AL-1611 (serv.man12) Trouble code list Service Manual 6 35.36 KB
AL-1611 (serv.man11) User program Service Manual 2 61.76 KB
AL-1611 (serv.man9) Adjustments Service Manual 10 339.31 KB
AL-1611 (serv.man8) Operational descriptions Service Manual 8 178.27 KB
AL-1611 (serv.man7) Unpacking and installation Service Manual 4 235.58 KB
AL-1611 (serv.man6) External views and internal structure Service Manual 7 297.36 KB
AL-1611 (serv.man5) Consumable parts Service Manual 2 87.51 KB
AL-1611 (serv.man4) General Service Manual 1 12.76 KB
AL-1611 (serv.man3) Front cover, precautions and contents Service Manual 3 159.2 KB
AL-1611 (serv.man19) Complete service manual Service Manual 127 46.56 MB
AL-1611 (serv.man24) Operation Manual User Guide / Operation Manual 80 2.2 MB
AL-1611 (serv.man20) Information of parts change Parts Guide 2 452.53 KB
AL-1611 (serv.man21) Strength increase of the turn over gate to prevent breakage. Parts Guide 3 58.91 KB
AL-1611 (serv.man22) Information of parts change To improve productivity, the L pulley has been changed Parts Guide 2 20.3 KB
AL-1611 (serv.man23) Parts guide (Inc. exploded views) Parts Guide 43 1.52 MB
AL-1611 (serv.man2) Specifications Specification 2 26.17 KB
AL-1611 PARTS SUCH AS SIDE DOOR DETECT SWITCH UNIT CHANGE IN SHAPE FOR PRODUCTIVITY IMPROVEMENT Specification 3 162.03 KB
AL-1611 (serv.man36) Information of parts change. (MF sensor spring, Delivery pulley 34T). Technical Bulletin 2 359.14 KB
AL-1611 (serv.man47) Countermeasure against breakage of the discharge holder claw Technical Bulletin 1 93.77 KB
AL-1611 (serv.man46) Countermeasure against breakage of the fusing rear paper guide rib Technical Bulletin 1 115.89 KB
AL-1611 (serv.man45) Countermeasure against manual feed paper jams, due to contamination of drive section Technical Bulletin 2 277.57 KB
AL-1611 (serv.man44) Change to shape of rear plate to prevent dislocation Technical Bulletin 1 183.14 KB
AL-1611 (serv.man43) Countermeasure against U2-40 trouble due to power supply noise Technical Bulletin 1 1.08 MB
AL-1611 (serv.man42) Information of parts change (Core) Technical Bulletin 1 14.65 KB
AL-1611 (serv.man41) Countermeasure against skewing due to gap in Tray Guide R Technical Bulletin 2 185.56 KB
AL-1611 (serv.man40) Countermeasure against paper jame due to deformation of the fusing upper paper guide sheet. Technical Bulletin 2 47.79 KB
AL-1611 (serv.man39) Correction to illustration of optical unit in parts guide. Technical Bulletin 1 80.79 KB
AL-1611 (serv.man38) Countermeasure against peeling of the fusing front PG sheet Technical Bulletin 2 46.95 KB
AL-1611 (serv.man37) 011-Information of parts change. Technical Bulletin 1 9.71 KB
AL-1611 (serv.man34) Countermeasure against widening of the screw hole of fixing the fuser unit to the intermediate frame. Technical Bulletin 2 482.47 KB
AL-1611 (serv.man33) 1. Multi frame change, 2. Shape change of the fusing cover. Technical Bulletin 2 38.75 KB
AL-1611 (serv.man32) 1. Change of the MX roller, 2. Material change of the roller arm, 3. Shape change of the delivery upper paper guide 20, 4. Change of the fusing connecting plate, 5. Standardisation of the parts code for the ATC sensor. Technical Bulletin 5 112.49 KB
AL-1611 (serv.man31) Change due to production stoppage of rubber for the manual paper feed roller. Technical Bulletin 2 121.48 KB
AL-1611 (serv.man30) Change due to production stoppage of rubber for the manual paper feed roller. (Repeat due to incorrect information) Technical Bulletin 2 83.88 KB
AL-1611 (serv.man29) Attachment of a high temperature Caution Label. Technical Bulletin 2 108.08 KB
AL-1611 (serv.man28) Strength increase of the boss for mounting the manual paper feeding latch pawl B. Technical Bulletin 3 934.83 KB
AL-1611 (serv.man27) Strength increase of the fusing lower frame. Technical Bulletin 2 57.91 KB
AL-1611 (serv.man26) PICK UP ROLLER ON MULTI PAPER FEED UNIT CHANGE IN SHAPE Technical Bulletin 2 26.52 KB
AL-1611 (serv.man25) MODIFICATION OF PAPER FEED ROLLER HOLDER ETC. TO IMPROVE PRODUCTIVITY Technical Bulletin 5 290.28 KB

Random: