Read Sharp AL-1530 (serv.man5) Service Manual online
3. INSTALLING THE TD CARTRIDGE
1) Open the bypass tray and then open the side cover whilst press-
ing the side cover open button.
2) Remove the CAUTION tape from the front cover and remove the
two protective pins from the fusing unit by pulling the strings up-
ward one at a time.
ward one at a time.
3) Push gently on both sides of the front cover to open the cover.
4) Remove the TD cartridge from the bag. Remove the protective
paper. Hold the cartridge on both sides and shake it horizontally
four or five times.
four or five times.
5) Hold the tab of the protective cover and pull the tab towards you
to remove the cover.
6) Gently insert the TD cartridge until it locks in place.
7) Close the front cover and then the side cover by pressing the
round projections near the side cover open button.
CAUTION: When closing the covers, be sure to close the front
cover securely and then close the side cover. If the
covers are closed in the wrong order, the covers may
be damaged.
covers are closed in the wrong order, the covers may
be damaged.
4. LOADING COPY PAPER
1) Raise the handle of the paper tray and pull the paper tray out until
it stops.
2) Remove the pressure plate lock. Whilst holding down the pressure
plate, rotate the lock in the direction of the arrow as shown, lift
and remove.
and remove.
CAUTION tape
Protective pins
AL-1530
4 – 2
Click on the first or last page to see other AL-1530 (serv.man5) service manuals if exist.