AL-1530 (serv.man5). AL1530 Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 6

Improper installation may damage the copier. Please note the following
during initial installation and whenever the copier is moved.
Note: If the copier is moved from a cool place to a warm place, con-

densation may form inside the copier. Operation in this condition
will cause poor copy quality and malfunctions. Leave the copier
at room temperature for at least 2 hours before use.

1) Do not install your copier in areas that are:

● damp, humid, or very dusty

● exposed to direct sunlight

● poorly ventilated

● subject to extreme temperature or humidity changes, e.g., near

an air conditioner or heater.

2) Be sure to allow the required space around the machine for ser-

vicing and proper ventilation.

3) Do not expose the drum cartridge to direct sunlight.

Doing so will damage the surface (green portion) of the drum
cartridge, causing smudges on copies.

4) Store spare supplies such as drum cartridges and TD cartridges

in a dark place without removing from the package before use.
If they are exposed to direct sunlight, smudges on copies may
result.

5) Do not touch directly the surface (green portion) of the drum

cartridge with a hand.
Doing so will damage the surface of the cartridge, causing
smudges on copies.

1) Be sure to hold the handles on both sides of the copier to unpack

the copier and carry it to the installation location.

2) Remove pieces of tape A, B, C, D and E and protective cover F.

3) Then open the original cover and remove protective materials G

and H.Go to step 5).

4) Remove protective material A.

5) Use a coin (or suitable object) to remove the screw.

Note: Store the screw in the paper tray because it will be required

if the copier has to be moved.

20 cm

10 cm

10 cm

20 cm

A

B

C

E

F

D

H

G

A

AL-1530

4 – 1