PN-ZB01 (serv.man2) - Sharp Monitor Service Manual (repair manual). Page 101

Read Sharp PN-ZB01 (serv.man2) Service Manual online

CHAPTER 6. FIRMWARE UPDATA PROCEDURES/EDID WRITING PROCEDURES
PN-E601 FIRMWARE UPDATA PROCEDURES/EDID WRITING PROCEDURES
 6 – 3
1 - 3. VERSION CHECK PROCEDURES
■ CHECK METHOD BY THE FIRMWARE 
UPDATER
The current firmware version can be checked by pressing [VERSION]
button when the monitor power lamp is lighted in green.
The check sum can be also checked by pressing [CHECK SUM] button
similarly.
■ CHECK METHOD BY THE SERVICE MENU
With an image displayed on the screen, use the remote controller to dis-
play the SERVICE MENU1 screen. Check the firmware version.
(FIRM VERSION (MAIN)).
To display the SERVICE MENU1 screen, press and hold [SIZE] button
on the remote controller for 5 sec, and press the buttons in the
sequence of [
1] [ 4 ] [3] and [ 2 ] button. 
After checking the version, press [MENU] button of the remote control-
ler to close the SERVICE MENU1 screen. 
DISPLAY
DISPLAY + EXPANSION BOARD
SERVICE1
SERVICE2
SERVICE3
MODEL
S/N
SERVICE MENU1
FIRM VERSION (MAIN)
CHECK SUM (MAIN) 
1/1
: PN-XXXX
: XXXXXXXX
: OK Ver 0.16 (080101)
: OK 1234ABCDEF
DSD VERSION
USAGE TIME
: OK Ver 1.1.044
: 999999H
END
̖[MENU]
SERVICE1
SERVICE2
SERVICE3
MODEL
S/N
SERVICE MENU1
FIRM VERSION (MAIN)
CHECK SUM (MAIN) 
FIRM VERSION (SUB)
CHECK SUM (SUB)
DSD VERSION
USAGE TIME
1/1
: PN-XXXX
: XXXXXXXX
: OK Ver 0.16 (080101)
: OK 1234ABCDEF
: OK Ver 0.16 (080101)
: OK 1234ABCD
: OK Ver 1.1.044
: 999999H
END
̖[MENU]
Page of 127
Display

Click on the first or last page to see other PN-ZB01 (serv.man2) service manuals if exist.