PN-R903. Installation Notes - Sharp Monitor Handy Guide. Page 8

Precautions for vibration, inclination, voltage, residual images and expansion

-This information display is not designed for the usage in any 
places which have strong vibrations, such as inside motor 

-When a still image is being displayed for a long period, image 
retention might occur.

p

g

vehicles.

-If the monitors will be used in the place which has the possibility 
of even small vibration like railway station’s platform, shock 
absorber must be considered.

g

-Image retention can be removed by displaying motion images 
or turning off the monitor. However, the longer the still image is 
being displayed, the harder to remove the  image retention, 
therefore, the solutions mentioned above should be taken 

periodically.

-Installing with inclination more than 20 degrees is impossible.

-When using acrylic or polycarbonate protection panel, please be 
aware of expansion due to heat or moisture absorption.

Please use certainly the attached or designated power cord

Acrylic protection panel can expand about 0.4%(about 8 mm) 
when absorbing the moisture.

Please fix the protection panel not to strain it by expansion.

-Please use certainly the attached or designated power cord.
Attached power cord is three pin for 100V level. For 
200V(50/60Hz) level, provided service parts(QACCJA104WJPZ) 
(with change)

PN-R903 Installation Guidelines <Rev1.0> February 2013

CONFIDENTIAL

7