Read Sharp PN-R903 Handy Guide online
Precautions in installing and handling 1
Precautions in installing and moving
The display surface is made of glass. Please use
The display surface is made of glass. Please use
rear handgrip and underside of the display while
installing and moving. Please do not hold surface,
the edge of the display.
It is possible to ca se damage and malf nction of
rear handgrip and underside of the display while
installing and moving. Please do not hold surface,
the edge of the display.
It is possible to ca se damage and malf nction of
It is possible to cause damage and malfunction of
display. Please be careful not to drop the display.
display. Please be careful not to drop the display.
Caution for Installing
Prior to installing the PN-R903, please refer to following items carefully in order to use PN-R903 for long term reliable service.
- The accompanying stand is for temporary use until the display installed formally. It is not for permanent use and please do not turn on power of the
monitor when the temporary stand is used.
- Please use a mounting bracket which can support 4 times weight of the display. The wall on which displays are mounted must support 4 times total
weight of the display and mounting bracket (etc. concrete wall / concrete pillar).
- Only vertical installation perpendicular to level surface is recommended, and the limitation of the inclination angle is between 0 to 20 degrees
upward/downward.
- Usable temperature range of this display is 0℃-40℃. Using in other condition may cause failure and deterioration.
g
y
g
y
Please keep enough space to avoid heating.
- Please set this display keeping out of direct sunlight. It may cause failure and deterioration.
- It is necessary to take measures against dust such as regular cleaning in a dusty area.
- For safety, please give measures for preventing fall of display.
- The ground connection is necessary when the power plug is connected.
- It is necessary to take measures against dust such as regular cleaning in a dusty area.
- For safety, please give measures for preventing fall of display.
- The ground connection is necessary when the power plug is connected.
- Please refer to the “SAFETY PRECAUTIONS”, “TIPS AND SAFETY INSTRUCTION” and “MOUNTING
PRECAUTIONS”
hi h i d
ib d i
h
i
l f h di
l
ll
Please ask the professional dealer/contractor if you can’t keep the ground connection.
PN-R903 Installation Guidelines <Rev1.0> February 2013
CONFIDENTIAL
PRECAUTIONS” which is described in the operation manual of the display as well.
-Please be careful that the warranty can’t be applied if these precautions are not kept.
11
Click on the first or last page to see other PN-R903 service manuals if exist.