PN-L602B (serv.man6) - Sharp Monitor Service Manual (repair manual). Page 21

PN-L702B/L602B　INSTALLATION, ADJUSTMENT, SETTING

 2 – 2

n

Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/disconnecting cables. Also, read the

manual of the equipment to be connected.

n

Be careful not to mix up the input terminal with the output terminal when connecting cables. Mixing up the input and output terminals may cause
malfunctions and the other problems.

n

Images may not be displayed properly depending on the computer (video card) to be connected.

n

A screen with 1920 x 1080 resolution may not be displayed correctly on “PC RGB”. In this case, check the settings of your computer (video

card) to verify that input signals conform to specifications of this monitor.

n

If there is a check box to disable EDID in display control panel, check it when using “PC RGB”.

n

Use the automatic screen adjustment when a PC screen is displayed for the first time using “PC D-SUB” or “PC RGB”, or when the setting of

the PC is changed. The screen is adjusted automatically when “SELF ADJUST” in the OPTION menu is set to “ON”.

n

If the audio output from the playback device is connected directly to speakers or other devices, the video on the monitor may appear delayed
from the audio portion.

Audio should be played through this monitor by connecting the playback device to the monitor’s audio input, and connecting the monitor’s

audio output to the speakers or other devices.

n

The audio input terminals used in each input mode are factory-set as follows.

n

Attach a speaker cable core (included with the PN-ZB01) to the end of the speaker cable connected to the monitor. (When you attach the exter-

nal speaker to the monitor)

n

To use the touch panel, the touch panel driver and pen soft must be installed from the supplied CD-ROM and the touch panel must be connected to your PC.

n

Connected to the touch panel.

Installing the touch panel driver.
3Refer to page 2 - 26  "3. SETTING UP THE PC (TOUCH PANEL DRIVER)".
To instal the pen soft, refer to the manual for the pen soft. 

PC D-SUB

PC DVI-D

PC RGB

Audio input terminal

AV DVI-D

Audio1 input terminal

AV COMPONENT(BNC)
AV S-VIDEO

AV VIDEO (BNC)

Audio2 input terminal

AV COMPONENT (D-SUB)

AV VIDEO (D-SUB)

Audio input terminal

PC HDMI
AV HDMI

PC/AV HDMI input terminal

ŘũŦůġŵũŦġőŏĮśŃıIJ
ĩŰűŵŪŰůŢŭĪġŪŴġŢŵŵŢŤũŦť

For power
outlet

Power cord
(Supplied)

USB port

PC D-SUB
input terminal

Audio input
terminal

Audio output
Vterminals

RS-232C
input terminal

RS-232C
output terminal

PC/AV HDMI
input terminal

PC/AV DVI-D input terminal

PC/AV DVI-D output terminal

LAN terminal

External speaker terminals

Audio 1 input terminals
Audio 2 input terminals

PC RGB
input terminals

AV component input terminals

AV video
Ainput terminal

AV S-video input terminal

AC input
terminal