Read Sharp PN-E521 (serv.man3) Service Manual online
CHAPTER 2. INSTALLATION, ADJUSTMENT, SETTING
PN-E601 INSTALLATION, ADJUSTMENT, SETTING
2 – 3
■ CONNECTION WHEN THE PN-ZB01 (OPTIONAL) IS ATTACHED
The PN-ZB01 expansion board (optional) allows the use of additional connection terminals.
<LAN TERMINAL>
You can control the monitor from a PC on a network by connecting a commercially available LAN cable between this terminal and a network.
<PC/AV DVI-D OUTPUT TERMINAL>
n
The video of the PC/AV DVI-D input can be output to an external device.
n
Outputting HDCP-encrypted video requires an external device which supports HDCP.
n
This terminal allows the daisy chain connection of up to 5 monitors.
MEMO
n
The length of the signal cables or surrounding environment may
affect the image quality.
n
The screen may not display properly when using terminals other
than “PC DVI-D”/“AV DVI-D” for the input mode. In this case, turn
than “PC DVI-D”/“AV DVI-D” for the input mode. In this case, turn
off the power to all the monitors connected in a daisy chain and
then turn the power on again.
n
When connecting monitors in a daisy chain set “AUTO INPUT
CHANGE” to “OFF”.
CHANGE” to “OFF”.
n
Video output is disabled in the following cases.
---When the input mode is “PC HDMI”/“AV HDMI”.
---When PIP SOURCE of the PIP/PbyP menu is set to PC
“HDMI” or “AV HDMI”.
---When the power is turned “off”.
---When the monitor is in input signal waiting mode.
Video
input
PC/AV DVI-D input terminal
n
Set “DVI” of “INPUT SELECT” on the OPTION menu according to the device to be connected.
n
Select the audio input terminal to be used in “PC DVI-D” or “AV DVI-D” of “AUDIO SELECT” on the
OPTION menu.
PC RGB input terminals
n
Set “BNC” of “INPUT SELECT” on the OPTION menu to “PC RGB” when using the PC RGB input termi-
nals.
n
Select the audio input terminal to be used in “PC RGB” of “AUDIO SELECT” on the OPTION menu.
AV component input
terminals
n
Set “BNC” of “INPUT SELECT” on the OPTION menu to “AV COMPONENT” when using the AV
component input terminals.
n
Select the audio input terminal to be used in “AV COMPONENT” of “AUDIO SELECT” on the OPTION
menu.
menu.
AV S-video input terminal
n
Select the audio input terminal to be used in “AV S-VIDEO” of “AUDIO SELECT” on the OPTION
menu.
AV video input terminal
n
Select the audio input terminal to be used in “AV VIDEO” of “AUDIO SELECT” on the OPTION menu.
Audio
input
Audio1 input terminals/
Audio2 input terminals
n
Set the audio input terminal to be used in each input mode in “AUDIO SELECT” on the OPTION
menu.
H
V
R
G
B
Cr/Pr
Y
Cb/Pb
First monitor
Second monitor
Digital signal (DVI) cables
(commercially available)
(commercially available)
To PC digital RGB output terminal
shows the signal flow
PC/AV DVI-D
output terminal
output terminal
PC/AV DVI-D
input terminals
input terminals
PC/AV DVI-D
output terminals
output terminals
Example
Click on the first or last page to see other PN-E521 (serv.man3) service manuals if exist.