Read Sharp PN-E521 (serv.man3) Service Manual online
CHAPTER 2. INSTALLATION, ADJUSTMENT, SETTING
PN-E601 INSTALLATION, ADJUSTMENT, SETTING
2 – 2
1 - 1. CONNECTING PERIPHERAL EQUIPMENT
CAUTION
n
Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/disconnecting cables. Also, read the
manual of the equipment to be connected.
n
Be careful not to mix up the input terminal with the output terminal when connecting cables. Mixing up the input and output terminals may cause
malfunctions and the other problems.
MEMO
n
Images may not be displayed properly depending on the computer (video card) to be connected.
n
A screen with 1920 x 1080 resolution may not be displayed correctly on “PC RGB”. In this case, check the settings of your computer (video
card) to verify that input signals conform to specifications of this monitor.
card) to verify that input signals conform to specifications of this monitor.
n
If there is a check box to disable EDID in display control panel, check it when using “PC RGB”.
n
Use the automatic screen adjustment when a PC screen is displayed for the first time using “PC D-SUB” or “PC RGB”, or when the setting of
the PC is changed. The screen is adjusted automatically when “SELF ADJUST” in the OPTION menu is set to “ON”.
n
If the audio output from the playback device is connected directly to speakers or other devices, the video on the monitor may appear delayed
from the audio portion.
Audio should be played through this monitor by connecting the playback device to the monitor’s audio input, and connecting the monitor’s
Audio should be played through this monitor by connecting the playback device to the monitor’s audio input, and connecting the monitor’s
audio output to the speakers or other devices.
n
The audio input terminals used in each input mode are factory-set as follows.
■ CONNECTION WITH A PC OR AV EQUIPMENT
Input mode
Audio input terminal (Factory setting)
PC D-SUB
PC DVI-D
PC DVI-D
PC RGB
Audio input terminal
AV DVI-D
Audio1 input terminal
AV COMPONENT
AV S-VIDEO
AV S-VIDEO
AV VIDEO
Audio2 input terminal
PC HDMI
AV HDMI
PC/AV HDMI input terminal
Video
input
PC/AV HDMI input terminal
n
Use a commercially available HDMI cable (conforming to the HDMI standard) for PC/AV HDMI input
terminal.
n
Set “HDMI” of “INPUT SELECT” on the OPTION menu according to the device to be connected.
n
Select the audio input terminal to be used in “PC HDMI” or “AV HDMI” of “AUDIO SELECT” on the
OPTION menu.
When “HDMI” is selected, connection to the audio input terminal is unnecessary.
PC D-SUB input terminal
n
When the PN-ZB01 (optional) is attached, select the audio input terminal to be used in “PC D-SUB”
of “AUDIO SELECT” on the OPTION menu.
Audio
input/
output
Audio input terminal
n
Use an audio cable without resistance.
n
When the PN-ZB01 (optional) is attached, set the audio input terminal used for each input mode in
“AUDIO SELECT” on the OPTION menu.
“AUDIO SELECT” on the OPTION menu.
Audio output terminals
n
The output sound varies depending on the input mode.
n
The volume of the output sound can be fixed by setting “AUDIO OUTPUT” on the OPTION menu.
n
It is not possible to control the sound output from the audio output terminals with the AUDIO menu.
Monitor
control
RS-232C input terminal
RS-232C output terminal
n
You can control the monitor from a PC by connecting a commercially available RS-232 straight cable
between these terminals and the PC.
Click on the first or last page to see other PN-E521 (serv.man3) service manuals if exist.