Read Sharp PN-70TA3 (serv.man12) User Guide / Operation Manual online
24
E
Basic Operation
Using the touch menu
You can touch the monitor to change input mode, volume, and
other settings.
1. Press the TOUCH MENU button.
TOUCH MENU button
2. Touch the screen to change settings.
INPUT
WHITEBOARD
BOTTOM INPUT TERMINAL
DisplayPort
HDMI1
D-SUB1
SIDE INPUT TERMINAL
HDMI2
HDMI3
D-SUB2
(4)
(1)
(2)
(3)
(1) INPUT (Input mode selection)
Changes the input mode.
Input mode
Video
Audio
DisplayPort
DisplayPort input terminal
*5
HDMI1
HDMI1 input terminal
*1
HDMI2
HDMI2 input terminal
*2
HDMI3
HDMI3 input terminal
*3
D-SUB1
D-sub1 input terminal
*4
D-SUB2
D-sub2 input terminal
WHITEBOARD
WHITEBOARD
• When the input mode is changed, the touch panel
connection also changes. You can set whether the side or
bottom USB port is used in each input mode. (See page
37.)
*1 Select the terminal to be used in HDMI1 of INPUT
SELECT. (See page 36.)
*2 Select the terminal to be used in HDMI2 of INPUT
SELECT. (See page 36.)
*3 Select the terminal to be used in HDMI3 of INPUT
SELECT. (See page 36.)
*4 Select the terminal to be used in D-SUB1 of INPUT
SELECT. (See page 36.)
*5 Select the terminal for AUDIO SELECT which is used for
audio input. (See page 36.)
(2) Volume adjustment
Changes the volume.
15
Mutes the sound.
Touch again to return the sound to the original
volume.
Increases the volume.
Decreases the volume.
(3) Touch action setting
Touch to disable touch action.
Touch again to enable touch action.
TIPS
• When the input mode is changed, the disable touch
action setting is canceled.
• When TOUCH OUTPUT INVALID ICON is set to ON and
touch action is disabled, the TOUCH OUTPUT INVALID
icon appears in the monitor.
• You can touch the TOUCH OUTPUT INVALID icon in the
monitor to enable touch action.
• The position of the TOUCH OUTPUT INVALID icon can
be changed. (See page 38.)
• The TOUCH OUTPUT INVALID icon appears even when
a USB cable is not connected.
(4) Exit touch menu
Closes the touch menu.
TIPS
• The touch menu can also be used with the remote control
unit.
(1) Hold down
DISPLAY
at least 5 seconds.
The touch menu appears.
(2) Select the setting item with
.
(3) Set with
, and press
ENTER
.
- The setting is entered.
- Press
- Press
RETURN
to exit the touch menu.
Click on the first or last page to see other PN-70TA3 (serv.man12) service manuals if exist.