Read Sharp PN-70TA3 (serv.man12) User Guide / Operation Manual online
20
E
Touch pen actions
Pen tip
Battery indicator
Function button 1
Function button 3
Function button 2
Functions can be assigned to the function buttons. For details,
see the Touch Pen Utility Operation Manual.
The factory default settings are as follows.
• Function button 1 : Right mouse click
• Function button 2 : PageDown
• Function button 3 : PageUP
When the function button is pressed, the battery indicator
illuminates.
If the battery indicator does not illuminate, check if the battery
is depleted.
TIPS
• Use function buttons near the front of the screen. If too far
away, operation will not be possible.
• Press function buttons slowly and firmly. If pressed too
quickly, the action may not be recognized.
• The line may break if the touch pen battery is low or there
is other wireless equipment in operation nearby.
• If the pen tip becomes worn or damaged, replace it.
n
Touch pen settings
Touch pen settings are configured using the Touch Pen Utility.
For details on the settings and how to use the utility, see the
Touch Pen Utility Operation Manual.
Adding touch pens (pairing)
• Up to 4 touch pens can be used simultaneously. (Up to
10 touch pens can be registered.) When touch pens are
added, they can be used to write simultaneously, and a
different color can be set for each pen.
• To use an optional touch pen with the monitor, the touch
pen must be registered in the touch pen adapter. (pairing)
Item
Model
Remarks
Touch pen
PN-ZL02
Additional touch pen
Perform touch pen pairing for one pen at a time.
1. Open the touch pen registration screen.
Using WHITEBOARD
(1) Touch the launch button.
(2) Touch [Touch Pen] in the launcher.
(3) Touch [Touch pen settings].
Using the computer
(1) Click the touch pen utility icon ( ) on the taskbar.
(2) Click [Touch pen settings].
2. Select a line in the touch pen settings screen that does
not have a pen registered, and touch [Registration].
3. Simultaneously hold down function button 1 and
function button 3 of the touch pen being paired for at
least 5 seconds (approx.).
4. When the battery indicator blinks, release function
button 1 and function button 3.
A message appears after completion of pairing.
5. Touch [OK].
TIPS
• When multiple touch pens are used, touch positions and
touch pen information (color, thickness, etc.) may become
interchanged, and lines may break.
- When touched simultaneously
- When touch pens are moved near each other
- When batteries are low
- When other wireless equipment is operating nearby
• Do not press the pen tip on other than the screen.
This may cause malfunctioning.
• One touch pen cannot be registered in multiple touch pen
adapters.
• You can affix the supplied ID labels to the PN-ZL02 to
distinguish the touch pens.
Touch Panel / Touch Pen Preparations
Click on the first or last page to see other PN-70TA3 (serv.man12) service manuals if exist.