PN-60TA3 (serv.man7). Network Tool - Sharp Monitor User Guide / Operation Manual. Page 8

 

 

Network Scanner Tool Lite User’s Guide 

4 

After installation, the Network Scanner Tool Lite Setup Wizard automatically starts and scans 
your network to detect Sharp multifunction scanners. The setup utility provides default 
destination and image-processing commands. And, it can modify those. Once specified, these 
definitions are stored in your network scanner’s of web page Desktop Destination Profile. 

Profile Name 

A name that appears on the scanner's front panel that refers to the rest of 
the settings in the destination profile. You typically select a profile by 
name before scanning a document. 

IP Address or 
Desktop Host 
Name 

This IP address or desktop host name is used to identify your computer 
that’s running the Network Scanner Tool Lite. 

Desktop Port Number

 

This number is used to contact the Network Scanner Tool Lite on your 
computer.  The default is 4687. If you change this number in the web 
page, be sure to also make the change in each computer’s Network 
Scanner Tool Lite configuration that will receive scans from the scanner. 

Process Directory 

[The Process Directory] setting specifies the name of the currently 
selected Process Definition.  Process Definitions that are defined in the 
Network Scanner Tool Lite. For example, “Email” tells the Network 
Scanner Tool Lite to execute the “Email” process when a scanned image 
arrives.  Refer to the Profiles Tab discussion below for more information.