Read Sharp PN-60TA3 (serv.man7) User Guide / Operation Manual online
Advanced Scanner Settings Screen
•
If your network operates under Simple Addressing or Exception DHCP policies described
in Chapter 2, it is recommended to select “Use IP Address” to identify your computer.
in Chapter 2, it is recommended to select “Use IP Address” to identify your computer.
•
If your network operates under Regular DHCP or Full DHCP policies described in
Chapter 2, it is recommended to select “Use Host Name” to identify your computer.
Chapter 2, it is recommended to select “Use Host Name” to identify your computer.
•
After making your selection, click OK.
The following table summarizes the recommended choices depending on the policy in force
on your network.
on your network.
POLICY
THE SCANNER ADDRESS
THE COMPUTER ADDRESS
1) Simple addressing
IP Address
IP Address
2) Regular DHCP
IP Address
Host Name
3) Full DHCP
Host Name
Host Name
4) Exception DHCP
Host Name
IP Address
Note: Periodically, after the setup wizard runs, the addressing methods selected will not
match this table. This is generally not a problem, but if you have trouble using the “Scan to
Desktop” profiles, set up the addresses manually to correct the problem.
match this table. This is generally not a problem, but if you have trouble using the “Scan to
Desktop” profiles, set up the addresses manually to correct the problem.
•
After entering the IP Address or Host Name on the Properties for Scanner screen, click
OK. The process settings take effect immediately.
OK. The process settings take effect immediately.
Examining/Changing Scanner Properties
Select the scanner for which you want to view or update settings from Known Scanners list and
click Properties button. The Properties for Scanner screen displays the settings for the specified
scanner and can be updated as described above.
click Properties button. The Properties for Scanner screen displays the settings for the specified
scanner and can be updated as described above.
Deleting a Scanner
To delete a scanner, select it from Known Scanners list and then click the Delete button. When the
confirmation message displays, click Yes.
confirmation message displays, click Yes.
Any active profiles residing on that scanner will be removed as part of the scanner delete process.
Network Scanner Tool Lite User’s Guide
34
Click on the first or last page to see other PN-60TA3 (serv.man7) service manuals if exist.