PN-60TA3 (serv.man7). Network Tool - Sharp Monitor User Guide / Operation Manual. Page 37

 

 

To add a new scanner, click the New button on Scanners tab. The Scanner Properties screen 
displays allowing you to add a scanner.  If you select a scanner that was automatically detected by 
the Network Scanner Tool Lite, then an IP address displays in the Scanner Properties screen. If 
you want to add a scanner that was not automatically detected, you will have to manually enter the 
correct IP address or Host Name (DNS or WINS). 

 

The following options are available on this screen. 

IP Address 

When the IP Address is used, the Network Scanner Tool Lite verifies that the IP address is 
assigned to a Sharp network scanner. 

If your network operates under the Simple Addressing or Regular DHCP policies described in 
Chapter 2, it is recommended to select “IP Address” to identify the scanner. IP addresses are 
available from the Print Configuration Page or your Network Administrator. 

Host Name 

If your network operates under the Full or Exception DHCP policy described in Chapter 2, it is 
recommended to use “Host Name” to identify the scanner. Host Names for scanners are available 
from your Network Administrator. 

Once you enter the Host Name, the Network Scanner Tool Lite will automatically fill in the 
correct IP Address. 

Advanced 

The Advanced button allows you to specify how your PC network address is to be resolved: 

Network Scanner Tool Lite User’s Guide 

33