Read Sharp PN-60TA3 (serv.man5) Service Manual online
PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3
INSTALLATION, ADJUSTMENT, SETTING 2 - 7
2. ADJUSTMENT
2 – 1. AUTOMATIC ADJUSTMENT
When you use the D-SUB1 or D-SUB2 terminals to display a PC
screen for the first time, or when you change the setting
of the PC, use the automatic screen adjustment.
1 ) Switch the input to D-SUB1 or to D-SUB2 and display the
adjustment pattern. (See the description above.)
2 ) Press and use or to display the SCREEN menu.
3 ) Press and select “AUTO”.
4 ) Press .
The automatic adjustment is complete in several seconds.
(MEMO)
If the screen cannot be adjusted properly with one automatic
adjustment, repeat the automatic adjustment two or three times.
Try manual adjustment if necessary.
SCREEN DISPLAY FOR ADJUSTMENT
Before making adjustments in the SCREEN menu or PICTURE
menu, display an image to be brighten the entire screen. If you are
using a Windows PC, use the adjustment pattern on the supplied
CD-ROM.
OPENING THE ADJUSTMENT PATTERN
The following example is performed in Windows 7.
1 ) Load the supplied CD-ROM into the computer’s CD-ROM
drive.
2 ) Open the CD-ROM in [My Computer].
3 ) Double-click [Adj_uty.exe].
The adjustment pattern will appear.
Adjust the screen automatically or manually.
4 ) When adjustment is finished, press the [Esc] on the computer’s
keyboard to quit the adjustment program.
5 ) Eject the CD-ROM from the CD-ROM drive.
(MEMO)
If the display mode on the computer you are using is 65,000
colors, the color levels in the color pattern may appear differently
or grayscale may appear to be colored.
(This is due to the specifications of the input signal and is not a
malfunction.)
Click on the first or last page to see other PN-60TA3 (serv.man5) service manuals if exist.