PN-60TA3 (serv.man5) - Sharp Monitor Service Manual (repair manual). Page 26

Read Sharp PN-60TA3 (serv.man5) Service Manual online

PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3 
INSTALLATION, ADJUSTMENT, SETTING    2 - 4 
 
Signal type 
Name 
Contents 
Other 
Touch pen adapter port 
- Connect the touch pen adapter in order to use the touch pen. 
USB 1 (type B) port 
 
- To use the touch panel with the computer connected to the 
bottom, connect the touch panel to the computer with the USB 
cable. (Factory setting. Can be changed in TOUCH INPUT 
SELECT on the SETUP menu.) 
USB 2 (type B) port 
 
- To use the touch panel with the computer connected to the side, 
connect to the computer with the USB cable. (Factory setting. 
Can be changed in TOUCH INPUT SELECT in the SETUP 
menu.) 
LAN terminal 
 
- You can control the monitor from a computer on a network by 
connecting a commercially available LAN cable between this 
terminal and a network. 
WHITEBOARD mode 
terminals 
USB ports 
 
- Connect USB devices that you will use with the WHITEBOARD 
(USB flash drive, USB keyboard, USB mouse). 
- Removing a USB flash drive. 
(1) Touch [Eject USB Media] (      ). 
 
(2) Touch the USB flash drive that you want to remove. 
(3) Touch [Stop]. 
(4) When “You can eject the USB device.” appears, remove the 
USB flash drive. 
(5) Touch [Close]. 
LAN terminal 
 
- A commercially available LAN cable can be used to connect the 
WHITEBOARD to the network while in use.   
 
■ 
Controlling the monitor with a PC (LAN)
 
1. LAN cable (commercially available, crossover) is directly connected to the PC 
Your monitor can be connected to a LAN allowing you to control it from a PC on the LAN. 
You can also configure the monitor to send e-mail notification when it has a problem. 
The connection requires a commercially available LAN cable (UTP cable, Category 5, straight through).

Display

Click on the first or last page to see other PN-60TA3 (serv.man5) service manuals if exist.

Random: