Read Sharp LL-T2000A (serv.man11) User Guide / Operation Manual online
13
English
Connecting the monitor and turning the monitor on and off
Connecting the monitor to a computer
(PC etc.)
(PC etc.)
When connecting, ensure that both the monitor and
computer are switched off.
computer are switched off.
Note:
-
-
Do not overly bend the cable or add extension
cords as this could lead to malfunction.
cords as this could lead to malfunction.
Note:
-
-
If connecting to the Sun Ultra series, a
conversion adapter (purchased separately) may
be required.
conversion adapter (purchased separately) may
be required.
Connecting to a second computer
A RGB signal cable (to be purchased separately) is
needed to connect a second computer.
needed to connect a second computer.
Note:
-
-
Do not overly bend the cable or add extension
cords as this could lead to malfunction.
cords as this could lead to malfunction.
1. Remove the cover
2. Connect the RGB signal cable (purchased
separately) to the INPUT 2 terminal.
3. Replace the cover.
Macintosh conversion adapter
RGB cable
Firmly insert the analog RGB output
terminal (mini D-sub 15 pin with 3 rows)
then tighten the screws each side.
terminal (mini D-sub 15 pin with 3 rows)
then tighten the screws each side.
If connecting to a D-sub 15 pin 2 row Apple
Power Macintosh, attach a Macintosh conver-
sion adapter (to be purchased separately) to
the RGB signal cable.
Power Macintosh, attach a Macintosh conver-
sion adapter (to be purchased separately) to
the RGB signal cable.
RGB signal cable
After connecting the adapter, tighten the
screws on each side to fix into place.
screws on each side to fix into place.
(Rear View)
Cover
INPUT 2 terminal
RGB signal cable
(purchased
separately)
(purchased
separately)
To the computer's
RGB output terminal
RGB output terminal
Click on the first or last page to see other LL-T2000A (serv.man11) service manuals if exist.