LL-T2000A (serv.man11) - Sharp Monitor User Guide / Operation Manual. Page 14

If a USB cable is required, please use the one
included.

Before connecting, ensure that the shape of the
USB cable connector is correct.

For information regarding the USB function (such
as set-up) please refer to the operation manual of
the computer to be connected.

Some computers, OS and other devices may not
be able to be activated. To ascertain a certain
device's USB compatibility, please contact the
manufacturer of the device.

1. Remove the cover.

2. Connect the USB cable.

3. Replace the cover.

(Rear View)

Cover

1. Press the monitor's power button.
2. Turn on the computer.

The power LED will be lit green, and the screen
will display an image.

Depending on the computer or OS, it may be
necessary to use the computer to install monitor
set-up information. If so, follow the steps below to
install the monitor set-up information. (p. 15)

When setting up the monitor or a connected
computer for the first time, connecting an
additional computer or after having changed an
aspect of the current system, perform an
automatic screen adjustment before use (p. 19).

↔

↔

↔

↔

↔ 2)

When connected to two computers, use the INPUT
button to switch between input signal terminals (i.e.
to choose which computer's screen you want dis-
played.)

Press power button

INPUT button
Pushing this button switches between input
signal terminals, so that the screen changes
to display any of the machines connected.

USB port: Downstream (2 ports)

USB port: Upstream (1 port)

This monitor can be used with hubs which use the
USB standard (Rev. 1.1).

Downstream (2 ports)
USB devices such as keyboard and mouse can be
connected here. Up to 100mA of power is able to be
supplied per port. Devices requiring more than
100mA cannot be connected.

Upstream (1 port)
USB compatible computers and self-powered hubs
can be connected. (Bus-powered hubs cannot be
connected.)

Turn on device to
which monitor is
connected

Power LED
Green light:

In use

Orange light: Power saving mode or signal

failure

Lamp off:

Power OFF