MX-M182, MX-M182D (serv.man5). Service Manual December 2011. - Sharp Copying Equipment Service Manual (repair manual)

mx-m182, mx-m182d (serv.man5) service manual
Model
MX-M182 MX-M182D (serv.man5)
Pages
127
Size
9.62 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Service Manual December 2011.
File
mx-m182-mx-m182d-sm5.pdf
Date

Read Sharp MX-M182 / MX-M182D (serv.man5) Service Manual online

Parts marked with “
“ are important for maintaining the safety of the set. 
Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION
DIGITAL MULTIFUNCTIONAL 
SYSTEM
MX-M182
MX-M182D
MX-M202D
MX-M232D
CODE : 00ZMXM182/S1E
MX-M182/M182D
MX-M202D/M232D
(With optional 
SPF/RSPF installed)
(With optional 
SPF/RSPF installed)
[ 1 ] GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1
[ 2 ] CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1
[ 3 ] SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1
[ 4 ] CONSUMABLE PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1
[ 5 ] EXTERNAL VIEWS AND INTERNAL STRUCTURES  . . . . . . . 5 - 1
[ 6 ] ADJUSTMENTS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 1
[ 7 ] SIMULATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 1
[ 8 ] TROUBLE CODE LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 1
[ 9 ] MAINTENANCE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 1
[10] DISASSEMBLY AND ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . 10 - 1
[11] OPERATIONAL DESCRIPTIONS . . . . . . . . . . . . . . . . . . . . . . 11 - 1
[12] FLASH ROM VERSION UP PROCEDURE. . . . . . . . . . . . . . . 12 - 1
[13] IP ADDRESS SETTING  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 - 1
[14] ELECTRICAL SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 - 1
CONTENTS
MODEL
Disconnect the AC cord before servicing the unit.
LASER WAVE - LENGTH : 785    15mm
Pulse times : 10.34   s    0.1  s/7mm ; MX-M182, MX-M182D, MX-M202D 
 8.665   s    0.1  s/7mm ; MX-M232D
Out put power : Max. 0.3mW
CONTENTS
[1] GENERAL
1. Note for servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1
[2] CONFIGURATION
1. System Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1
[3] SPECIFICATIONS
1. Copy mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1
2. Print mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 4
3. Scanner mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 8
[4] CONSUMABLE PARTS
1. Supply system table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1
2. Environmental conditions . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 2
3. Production number identification  . . . . . . . . . . . . . . . . . . . 4 - 3
[5] EXTERNAL VIEWS AND INTERNAL STRUCTURES
1. Appearance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 1
2. Internal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 2
3. Operation Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 3
4. Motor, solenoid, clutch . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 4
5. Sensor, switch  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 5
6. PWB unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 6
7. Cross sectional view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 7
[6] ADJUSTMENTS
1. Adjustment item list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 1
2. Copier adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 1
[7] SIMULATIONS
1. Entering the simulation mode . . . . . . . . . . . . . . . . . . . . . . 7 - 1
2. Canceling the simulation mode. . . . . . . . . . . . . . . . . . . . . 7 - 1
3. List of simulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 1
4. Contents of simulations  . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 3
[8] TROUBLE CODE LIST
1. Trouble code list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 1
2. Details of trouble codes  . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 1
3. Communication result code  . . . . . . . . . . . . . . . . . . . . . . . 8 - 6
[9] MAINTENANCE
1.  Maintenance table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 1
2.  Maintenance display system . . . . . . . . . . . . . . . . . . . . . . 9 - 2
3.  Note for replacement of consumable parts . . . . . . . . . . . 9 - 2
[10] DISASSEMBLY AND ASSEMBLY
1. High voltage section/Duplex transport section  . . . . . . . .10 - 1
2. Optical section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 - 2
3. Fusing section   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 - 4
4. Paper exit section  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 - 7
5. MCU  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 - 10
6. Optical frame unit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 - 10
7. LSU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 - 10
8. Tray paper feed section/Paper transport section  . . . . .10 - 11
9. Bypass tray section   . . . . . . . . . . . . . . . . . . . . . . . . . . .10 - 12
10. Power section  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 - 14
11. Developing section  . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 - 15
12. Process section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 - 16
13. Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 - 17
[11] OPERATIONAL DESCRIPTIONS
1. Paper feed operation . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 - 1
[12] FLASH ROM VERSION UP PROCEDURE
1. Preparation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 - 1
2. Download procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 - 1
3. Version confirming procedure . . . . . . . . . . . . . . . . . . . . .12 - 3
4. Facsimile Data upload procedure . . . . . . . . . . . . . . . . . .12 - 4
5. Updating the MX-NB12 firmware. . . . . . . . . . . . . . . . . . .12 - 5
6. Installation procedure  . . . . . . . . . . . . . . . . . . . . . . . . . . .12 - 6
[13] IP ADDRESS SETTING
1. Setting the ip address of the machine by 
system settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 - 1
[14] ELECTRICAL SECTION
1. Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 - 1
2. Actual wiring diagram  . . . . . . . . . . . . . . . . . . . . . . . . . . .14 - 2
MX-M182 GENERAL 1-1
[1] GENERAL
1. Note for servicing
Pictogram
The label (
 
) in the fusing area of the machine indicates the 
following:
 : Caution, risk of danger
 : Caution, hot surface
A. Warning for servicing
•The fusing area is hot. Exercise care in this area when removing 
misfeed paper.
•Do not disassemble the laser unit. Do not insert a reflective material 
such as a  screwdriver in the laser beam path.
It may damage eyes by reflection of laser beams.
B. Cautions for servicing
•Do not switch the machine rapidly on and off. After turning the machine 
off, wait 10 to 15 seconds before turning it back on.
•Machine power must be turned off before installing any supplies.
•Place the machine on a firm, level surface.
•Do not install the machine in a humid or dusty location.
•When the machine is not used for a long time, for example, during 
prolonged holidays, turn the power switch off and remove the power 
cord from the outlet.
•When moving the machine, be sure to turn the power switch off and 
remove the power cord from the outlet.
•Do not cover the machine with a dust cover, cloth or plastic film while the 
power is on. Doing so may prevent heat dissipation, damaging the 
machine.
•Use of controls or adjustments or performance of procedures other than 
those specified herein may result in hazardous laser radiation 
exposure.
•The socket-outlet shall be installed near the machine and shall be easily 
accessible.
C. Note for installation place
Improper installation may damage the machine. Please note the 
following during initial installation and whenever the machine is moved.
Caution : If the machine is moved from a cool place to a warm place, 
condensation may form inside the machine. Operation in this 
condition will cause poor copy quality and malfunctions. Leave 
the machine at room temperature for at least 2 hours before 
use.
Do not install your machine in areas that are:
•damp, humid, or very dusty
•poorly ventilated
•exposed to direct sunlight
•subject to extreme temperature or humidity changes, e.g., near an air 
conditioner or heater.
The machine should be installed near an accessible power outlet for 
easy connection and disconnection.
Be sure to connect the power cord only to a power outlet that meets the 
specified voltage and current requirements. Also make certain the outlet 
is properly grounded.
Note : Connect the machine to a power outlet which is not used for other 
electric appliances. If a lighting fixture is connected to the same 
outlet, the light may flicker.
Be sure to allow the required space around the machine for servicing 
and proper ventilation.
20 cm 
(8")
20 cm 
(8")
20 cm (8")
Page of 127
Display

Download Sharp MX-M182 / MX-M182D (serv.man5) Service Manual (Repair Manual)

Here you can read online and download Sharp MX-M182 / MX-M182D (serv.man5) Service Manual in PDF. MX-M182 / MX-M182D (serv.man5) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp MX-M182 / MX-M182D (serv.man5) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.